8Bitdo M30 бежични Bluetooth контролер - упутство за употребу

Увод

The 8Bitdo M30 Wireless Bluetooth Controller is a retro-inspired gamepad designed for a wide range of platforms. It features a classic 6-button layout and an 8-direction D-pad, reminiscent of the Sega Genesis and Mega Drive controllers. This manual provides detailed instructions for setting up, operating, and maintaining your M30 controller.

Распоред контролера

Familiarize yourself with the buttons and features of your 8Bitdo M30 controller.

• 6 Button Layout: Features A, B, C, X, Y, Z face buttons for versatile gameplay.
• 8-direction D-pad: A precise D-pad for accurate directional input.
• Дугмад за покретање/избор: Standard control buttons.
• Shoulder Buttons: L and R buttons located on the top of the controller.
• УСБ-Ц порт: За пуњење и жичану везу.

Сетуп

Пуњење контролера

The M30 controller is equipped with a 480mAh Li-on rechargeable battery. To charge, connect the controller to a USB power source using the included USB-C cable. A full charge typically takes 1-2 hours and provides approximately 18 hours of play time.

Повезивање са уређајима

The 8Bitdo M30 supports both wireless Bluetooth and wired USB-C connections across multiple platforms.

Нинтендо Свитцх

1. Ensure your Switch system is updated to version 3.0.0 or above (9.0.0 or above for Switch Lite).
2. On your Switch, go to System Settings > Controllers and Sensors > Pro Controller Wired Communication (set to On).
3. Hold the Y button and then press the START button on the M30 controller to power it on. The LED will flash.
4. On your Switch, go to Controllers > Change Grip/Order.
5. Press the PAIR button on the top of the M30 controller for 3 seconds. The LED will rapidly flash.
6. Once connected, the LED will become solid.

ПЦ (Виндовс)

1. Ensure your PC has Windows 10 or above and Bluetooth 4.0.
2. Hold the X button and then press the START button on the M30 controller to power it on. The LED will flash.
3. On your PC, go to Bluetooth & other devices settings and add a new Bluetooth device.
4. Select '8Bitdo M30' from the list of available devices.
5. Once connected, the LED will become solid.

МацОС

1. Hold the A button and then press the START button on the M30 controller to power it on. The LED will flash.
2. On your Mac, go to System Preferences > Bluetooth and turn Bluetooth on.
3. Select '8Bitdo M30' from the list of available devices.
4. Once connected, the LED will become solid.

Андроид

1. Уверите се да ваш Андроид уређај користи Андроид 9.0 или новију верзију.
2. Hold the B button and then press the START button on the M30 controller to power it on. The LED will flash.
3. On your Android device, go to Bluetooth settings and turn Bluetooth on.
4. Select '8Bitdo M30' from the list of available devices.
5. Once connected, the LED will become solid.

Распберри Пи

1. Ensure your Raspberry Pi has Bluetooth 2.0 or above (models 2B, 2B+, 3B, Zero are supported).
2. Hold the X button and then press the START button on the M30 controller to power it on. The LED will flash.
3. Follow your Raspberry Pi's specific instructions for Bluetooth device pairing.
4. Select '8Bitdo M30' from the list of available devices.
5. Once connected, the LED will become solid.

Упутство за употребу

Турбо функција

The M30 controller features a Turbo function for rapid button presses. To activate or deactivate Turbo functionality for a specific button:

1. Hold down the button you wish to apply Turbo functionality to.
2. While holding the button, press the STAR button (located near the Start button).
3. The Turbo function is now active for that button. Repeat the process to deactivate.

Напомена: The Turbo function does not apply to Nintendo Switch connections.

Ажурирање фирмвера

8Bitdo regularly releases firmware updates to improve performance and add new features. To ensure your controller is up-to-date, visit the official 8Bitdo support webсајт за најновији фирмвер и упутства за ажурирање.

Одржавање

Баттери Царе

• Избегавајте често потпуно пражњење батерије како бисте продужили њен век трајања.
• Чувајте контролер на хладном и сувом месту када га не користите дуже време.
• Charge the controller at least once every three months if not used regularly.

Чишћење

• Use a soft, dry cloth to wipe down the controller's surface.
• За тврдокорну прљавштину, благо дampи крпу са водом или благим, неабразивним средством за чишћење.
• Avoid using harsh chemicals or abrasive materials, as these can damage the controller's finish.

Решавање проблема

• Контролер се не повезује: Ensure the controller is charged. Verify the correct pairing mode for your device (X+START for PC, Y+START for Switch, etc.). Try restarting both the controller and the host device.
• Кашњење или прекид везе на улазу: Ensure there are no significant obstructions between the controller and the host device. Reduce interference from other wireless devices.
• Turbo function not working on Switch: This is expected behavior as the Turbo function is not supported on Nintendo Switch.
• Проблеми са пуњењем: Try a different USB-C cable or power adapter. Ensure the USB-C port on the controller is clean and free of debris.

Спецификације

Гаранција и подршка

For warranty information, technical support, or further assistance with your 8Bitdo M30 Wireless Bluetooth Controller, please visit the official 8Bitdo webсајт или директно контактирајте њихову корисничку подршку. Сачувајте доказ о куповини за потребе гаранције.