Fodsports FX6S

Fodsports FX6S Motorcycle Helmet Bluetooth Intercom System Instruction Manual

Model: FX6S | Brand: Fodsports

1. Увод

The Fodsports FX6S is a motorcycle helmet Bluetooth intercom system designed for clear communication and entertainment while riding. It supports up to 6 riders, offers universal pairing, FM radio, and voice dial capabilities. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and user safety.

2. Безбедносне информације

3. Садржај пакета

The Fodsports FX6S package includes:

Fodsports FX6S Package Contents

Image: Components included in the Fodsports FX6S package, showing the intercom unit, various microphones, speakers, mounting options, and cables.

4. Производ је готовview & Карактеристике

Fodsports FX6S Intercom Unit

Слика: Фронт view of the Fodsports FX6S intercom unit, highlighting its sleek design and LED display.

5. Подешавање и инсталација

5.1. Mounting the Intercom Unit

The FX6S offers two primary methods for mounting the main unit to your helmet: a clip-on bracket or an adhesive bracket.

  1. Изаберите начин монтаже: Select either the metal clip-on bracket (for helmets with a suitable edge) or the 3M adhesive bracket (for helmets without a suitable edge or for a more permanent fix).
  2. Attach Bracket to Helmet:
    • Clip-on Method: Loosen the screws on the clip-on bracket using the provided hex key. Slide the bracket onto the bottom edge of your helmet, ensuring it is secure. Tighten the screws. This method is generally installed on the left side for convenient operation.
    • Adhesive Method: Clean the desired mounting area on the helmet's left side thoroughly. Peel off the protective film from the 3M adhesive bracket and firmly press it onto the helmet surface for at least 30 seconds. Allow sufficient time for the adhesive to cure before attaching the main unit (typically 24 hours).
  3. Прикључите главну јединицу: Gently slide the FX6S main unit onto the installed bracket until it clicks securely into place.

Video: Demonstrates the installation steps for the FX6S unit on a helmet, including removing lining, attaching the bracket, and securing the main unit.

5.2. Installing Speakers & Microphone

  1. Remove Helmet Lining: Carefully remove the inner lining of your helmet to access the ear pockets and internal shell.
  2. Инсталирајте звучнике: Identify the ear pockets inside your helmet. Attach the Velcro pads (if not already present) to the helmet's interior where the speakers will sit. Place the speakers into the ear pockets, ensuring they are centered over your ears for optimal audio. The speaker with the shorter wire typically goes on the side closest to the main unit.
  3. Инсталирајте микрофон: Choose the appropriate microphone for your helmet type (boom mic for open-face/modular, soft wired mic for full-face). Attach the microphone to the inside of the helmet near your mouth using the provided Velcro. Ensure it is positioned to pick up your voice clearly without obstructing your vision or comfort.
  4. Путни каблови: Carefully route all speaker and microphone cables underneath the helmet's inner lining and padding to keep them tidy and prevent interference with comfort or safety. Secure any loose cables with small cable clips or tape if necessary.
  5. Reinstall Helmet Lining: Once all components are in place and cables are routed, reinstall the helmet's inner lining, ensuring no cables are pinched or exposed.

Video: Detailed instructions on how to install the headset and microphone section within a motorcycle helmet, including cable management and lining reinstallation.

6. Упутство за употребу

6.1. Укључивање/искључивање

6.2. Упаривање путем Bluetooth-а (мобилни телефон)

  1. Ensure the FX6S is powered off.
  2. Press and hold the Function button for 3 seconds. The red and blue indicator lights will flash, indicating the device is in pairing mode.
  3. On your mobile phone, enable Bluetooth and search for "FODSPORTS FX7" (or similar model name).
  4. Select the device to pair. Once connected, the blue light will flash slowly.

6.3. Управљање позивима

6.4. Репродукција музике

6.5. ФМ радио

Video: Demonstrates mobile connection, phone function, music playback, and FM radio operation for the Fodsports FX6S.

6.6. Intercom Usage (Group Pairing)

The FX6S supports up to 6 riders for group communication. For quick pairing of multiple devices:

  1. Power on all devices (No.1, No.2, No.3, No.4, etc.).
  2. Long press the Function button on all devices simultaneously to enter pairing state (red and blue lights flashing).
  3. Click the Function button on device No.1. Device No.1 will enter search state (blue light flashing rapidly).
  4. Wait for the Intercom buttons of all devices to light up blue, indicating successful pairing.

Video: Illustrates the 4-person one-click quick pairing method for Fodsports intercom devices.

6.7. Пуњење

Connect the provided USB charging cable to the charging port on the FX6S unit and a suitable USB power source. The LED indicator will show charging status. The device can be used while charging, extending its operational time during long trips.

7. Одржавање

КСНУМКС. Решавање проблема

9. Спецификације

Назив моделаFodsports FX6S Motorcycle Bluetooth Headset
Блуетоотх верзија5.0
Технологија повезивањаBluetooth Motorcycle Intercom
Контрола букеActive Noise Cancellation (CVC Technology)
Интерцом РангеUp to 1000m (656ft one-to-one)
Трајање батерије10 Hours (Music/Talk Time)
Ниво отпорности на водуОтпоран на воду
Контролни методTouch (Integrated Large Button/Jog Wheel)
Тежина артикла0.32 килограма (11.3 унци)
Димензије производа6.5 к 9 к 0.39 инча

10. Гаранција и подршка

Fodsports products come with a standard manufacturer's warranty. For warranty claims, technical support, or any inquiries regarding your FX6S intercom system, please refer to the contact information provided on the Fodsports official website or your purchase documentation. Keep your proof of purchase for warranty validation.