Увод
The Varmilo VPE87 TKL mechanical keyboard is designed for versatility and a premium typing experience. It features triple-mode connectivity (wired, Bluetooth, and 2.4 GHz wireless), hotswap sockets for switch customization, and a white LED backlight. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal use of your keyboard.
Садржај пакета
- Varmilo VPE87 Mechanical Keyboard
- УСБ-Ц кабл
- 2.4 GHz Wireless Receiver (typically stored in keyboard)
- Извлачење капица за тастере (може бити укључено)
- Извлачеч прекидача (може бити укључен)
Сетуп
Before using your Varmilo VPE87 keyboard, please follow these steps to set it up.
1. Physical Connection and Initial Charge
Image: USB-C port and 3-way cord channel. The USB-C port is located on the back of the keyboard, designed to allow the cable to exit from the left, right, or center for tidy cable management.
- Повежите приложени USB-C кабл са USB-C портом тастатуре.
- Connect the other end of the USB-C cable to an available USB port on your computer or a USB power adapter.
- For wireless use, ensure the keyboard is sufficiently charged. The white LED backlight will indicate charging status (specific indicator behavior may vary, refer to LED section).
2. Подешавање угла тастатуре
Слика: Сајд професионалацfile with kickstand extended. The keyboard features a 2-step kickstand on the underside, allowing users to adjust the typing angle for ergonomic comfort.
The VPE87 features a 2-step kickstand on its underside. Gently flip out the kickstands to adjust the keyboard's angle to your preferred typing position.
Упутство за употребу
Режими повезивања
The Varmilo VPE87 supports three connectivity modes: Wired, Bluetooth, and 2.4 GHz Wireless. You can switch between modes using the dedicated switch or key combinations, typically located on the back or side of the keyboard.
Жичани режим
- Connect the USB-C cable from the keyboard to your computer.
- Ваш оперативни систем ће аутоматски препознати тастатуру.
- This mode also charges the keyboard's internal battery.
Блуетоотх мод
- Ensure the keyboard is in Bluetooth mode (check the switch on the back/side).
- На свом уређају (рачунару, таблету, паметном телефону) омогућите Блутут и потражите нове уређаје.
- Select "Varmilo VPE87" (or similar name) from the list of available devices.
- Follow any on-screen prompts to complete pairing. The keyboard may support multiple Bluetooth profiles (e.g., Fn + 1, 2, 3 for different devices). Refer to specific key combinations for your model.
2.4 ГХз бежични режим
- Locate the 2.4 GHz USB receiver (often stored in a compartment on the keyboard's underside).
- Укључите УСБ пријемник у слободан УСБ порт на рачунару.
- Ensure the keyboard is in 2.4 GHz wireless mode (check the switch on the back/side).
- Тастатура треба аутоматски да се повеже са пријемником.
Контрола позадинског осветљења
Image: Keyboard with white LED backlight. The white LED backlight enhances visibility of the keycaps, especially in low-light conditions.
The VPE87 features a white LED backlight. Use the following key combinations to control the backlight:
- Fn + Arrow Up: Повећајте осветљеност позадинског осветљења.
- Fn + Arrow Down: Decrease backlight brightness / Turn off backlight.
- Fn + Other Keys: (Specific to model) May control backlight effects or modes. Refer to the keyboard's keycap legends for additional functions.
Hotswap Sockets (Switch Customization)
Слика: Врх view of the Varmilo VPE87 keyboard. This image displays the keyboard's layout and the artistic design on its keycaps and case, highlighting its aesthetic appeal.
The VPE87 is equipped with hotswap sockets, allowing you to change mechanical switches without soldering. This enables customization of your typing feel.
- Уклоните капицу тастатуре: Користите алат за извлачење капица тастера да бисте нежно уклонили жељену капицу тастера.
- Уклоните прекидач: Користите алат за извлачење прекидача да пажљиво ухватите горњу и доњу копчу прекидача и повуците га право нагоре.
- Уметни нови прекидач: Align the pins of the new switch with the holes in the hotswap socket. Gently push the switch straight down until it clicks into place. Ensure pins are not bent.
- Замена тастера: Вратите поклопац тастера назад на нови прекидач.
Note: Ensure the keyboard is disconnected or powered off before swapping switches. Use compatible 3-pin or 5-pin mechanical switches.
Остале карактеристике
- Double-layer Silicone Sound Absorption: This design minimizes typing noise for a quieter experience.
- 3-Way Cord Channel: The USB-C cable can be routed from the left, right, or center of the keyboard's underside for neat cable management.
Одржавање
Proper maintenance ensures the longevity and performance of your Varmilo VPE87 keyboard.
- Чишћење тастера:
- Use a keycap puller to remove keycaps.
- Wipe keycaps with a damp cloth and mild soap solution. Avoid harsh chemicals.
- Ensure keycaps are completely dry before reattaching.
- Чишћење тела тастатуре:
- Користите меку, суву крпу да обришете површину тастатуре.
- За прашину и остатке између тастера користите компримовани ваздух.
- Складиштење: Чувајте тастатуру на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура.
- Проливене течности: In case of a liquid spill, immediately disconnect the keyboard, turn it upside down to drain, and allow it to dry completely for at least 24-48 hours before attempting to use it again. Do not use a hairdryer or heat gun.
Решавање проблема
If you encounter issues with your Varmilo VPE87 keyboard, try the following solutions:
| Проблем | Решење |
|---|---|
| Keyboard not responding in Wired Mode. |
|
| Не могу се повезати преко Bluetooth-а. |
|
| 2.4 GHz wireless connection is unstable or not working. |
|
| Backlight is not working or dim. |
|
| A specific key is not registering. |
|
Спецификације
| Феатуре | Детаљ |
|---|---|
| Бранд | Вармило |
| Модел | ВПЕ87 |
| Опис тастатуре | Механички |
| Технологија повезивања | Bluetooth, USB-C (Wired), 2.4 GHz Wireless |
| Број кључева | 87 |
| Позадинско осветљење | White LED (Single Color) |
| Посебне карактеристике | Backlit, Wireless connectivity, Hotswap Sockets, 2-step Kickstand, Double-layer Silicone Sound Absorption, 3-way Cord Channel |
| Компатибилни уређаји | Лаптоп, рачунар, паметни телефон, таблет |
| Color (Switches) | Kailh Prestige Clicky (as per product listing) |
Гаранција и подршка
Varmilo products are designed for quality and durability. For specific warranty information, please refer to the warranty card included with your product or visit the official Varmilo webсајту.
For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Varmilo customer service through their official channels. You can often find support contact information on the brand's official webсајту или преко продавца где сте купили производ.
Visit the official Varmilo Store for more information: Varmilo Store on Amazon
