Electro-Harmonix Pico Triboro Bridge Overdrive, Distortion & Fuzz Pedal User Manual

1. Производ је готовview

The Electro-Harmonix Pico Triboro Bridge is a versatile multi-mode drive pedal designed to provide a wide range of tonal possibilities. It features three distinct modes: Overdrive, Distortion, and Fuzz, allowing musicians to bridge any gap in their gain requirements. With its powerful EQ capabilities, input contouring, and compact pico-sized footprint, the Triboro Bridge can serve as a foundational element for your tone or offer a fresh alternative to your existing drive pedals.

Кључне карактеристике:

• Wide range of saturation with Overdrive, Distortion, and Fuzz modes.
• Treble control boosts or cuts high end in Overdrive and Distortion modes.
• Bass control boosts or cuts low end in Overdrive and Distortion modes.
• Fuzz mode features a dedicated Gate control and a Low Pass Filter.
• Includes a power adapter for immediate use.

Слика: Под углом view of the Electro-Harmonix Pico Triboro Bridge pedal, highlighting its compact size and control knobs.

2. Подешавање и везе

Follow these steps to connect your Pico Triboro Bridge pedal to your audio setup:

1. Прикључак за напајање: Connect the included 9V DC power adapter to the power jack on the top of the pedal. Ensure the power supply meets the pedal's specifications (9V DC, center-negative).
2. Улазна веза: Connect your instrument (guitar, bass, etc.) to the INPUT jack on the right side of the pedal using a standard 1/4-inch instrument cable.
3. Излазна веза: Повежите ОУТПУТ прикључак на левој страни педале на ваш ampлифтер или следећу педалу у вашем сигналном ланцу користећи стандардни инструментални кабл од 1/4 инча.
4. Укључено: Once all connections are secure, plug the power adapter into a wall outlet. The pedal's LED will illuminate when active.

Слика: Позади view of the Pico Triboro Bridge pedal, showing the power input jack for connecting the power adapter.

3. Контроле и рад

The Pico Triboro Bridge features intuitive controls for shaping your desired drive tone. Understanding each knob and button is key to unlocking its full potential.

Контролна дугмад:

• ВОЛ (јачина звука): Controls the overall output level of the pedal. Adjust this to balance the effect's volume with your bypassed signal or other effects.
• ДОБИТАК: Controls the intensity of the drive, distortion, or fuzz effect. Higher settings result in more saturation and sustain.
• BASS / GATE:
  • In Overdrive and Distortion modes, this knob functions as a Басс control, allowing you to boost or cut low frequencies.
  • In Fuzz mode, this knob functions as a ГАТЕ control, adjusting the noise gate threshold to eliminate unwanted noise and feedback.
• TREBLE / TONE:
  • In Overdrive and Distortion modes, this knob functions as a ТРЕБЛЕ control, allowing you to boost or cut high frequencies.
  • In Fuzz mode, this knob functions as a ТОНЕ control, specifically a Low Pass Filter, for extreme tonal variations and shaping the fuzz character.

TYPE Button:

The small button labeled "TYPE" at the top of the pedal is used to select between the three primary drive modes and to engage the Input Contour Mode.

• Избор режима: Pressing the TYPE button cycles through the Overdrive (green LED), Distortion (orange LED), and Fuzz (red LED) modes.
• Input Contour Mode: Press and hold the TYPE button to enable or disable the Input Contouring EQ. When active, this mode applies a specific EQ to the input signal for a tighter, more modern character across all drive modes.

Слика: Врх view of the Pico Triboro Bridge pedal, illustrating the layout of the VOL, GAIN, BASS/GATE, TREBLE/TONE knobs, and the TYPE button.

4. Drive Modes Explained

The Pico Triboro Bridge offers three distinct drive modes, each with its unique sonic characteristics:

• Overdrive Mode (Green LED): This mode provides a gain spectrum ranging from low to mid-level saturation with an open voicing. It is ideal for use as a subtle "always-on" drive, adding warmth and grit, or as a solo boost to push your ampлифиер.
• Distortion Mode (Orange LED): Engaging this mode provides additional gain-staging, delivering tones from crunchy rhythms to fully saturated leads. It offers a more aggressive and compressed sound compared to the Overdrive mode.
• Fuzz Mode (Red LED): This mode transforms the pedal into a high-gain fuzz effect with over-the-top saturation. The BASS knob becomes a GATE control, and the TREBLE knob becomes a Low Pass Filter, allowing for unique and extreme tonal variations specific to fuzz.

5. Спецификације

6. Одржавање

To ensure the longevity and optimal performance of your Pico Triboro Bridge pedal, follow these maintenance guidelines:

• Чишћење: Користите меку, суву крпу за чишћење спољашњости педале. Избегавајте абразивна средства за чишћење, раствараче или прекомерну влагу, јер могу оштетити завршну обраду или унутрашње компоненте.
• Складиштење: Чувајте педалу на хладном и сувом месту, даље од директне сунчеве светлости, екстремних температура и високе влажности када се не користи.
• Везе: Периодично проверавајте све кабловске спојеве на хабање. Уверите се да су прикључци без прашине и остатака.
• Напајање: Always use the recommended 9V DC center-negative power adapter. Using an incorrect power supply can damage the unit and void the warranty.

КСНУМКС. Решавање проблема

If you encounter issues with your Pico Triboro Bridge pedal, refer to the following common troubleshooting steps:

• Нема звука:
  • Check all cable connections (instrument to input, output to amp).
  • Уверите се да је адаптер за напајање правилно повезан и да ради.
  • Проверите да ли је ваш инструмент и ampЛифиер ради исправно.
  • Check the pedal's bypass status; if it's true bypass, sound should pass even if the pedal is off.
• Слаб или изобличен звук (неочекивано):
  • Check the GAIN and VOL knob settings.
  • Ensure the correct drive mode (Overdrive, Distortion, Fuzz) is selected for your desired sound.
  • If in Fuzz mode, adjust the GATE and TONE (Low Pass Filter) knobs, as extreme settings can significantly alter the sound.
  • Test with different cables and power supplies to rule out faulty accessories.
• Прекомерна бука/брујање:
  • Ensure you are using a regulated, isolated power supply.
  • If in Fuzz mode, adjust the GATE knob to reduce unwanted noise.
  • Проверите да ли у вашем подешавању постоје петље уземљења.
  • Move the pedal away from power transformers or other sources of electromagnetic interference.

8. Гаранција и подршка

Electro-Harmonix products are designed for reliability and performance. For warranty information, product registration, or technical support, please refer to the official Electro-Harmonix webсајт или контактирајте њихову службу за кориснике. Сачувајте рачун као доказ о куповини за потребе гаранције.

За даљу помоћ, посетите: ввв.ехк.цом