1. Увод
This manual provides comprehensive instructions for the installation, operation, and maintenance of the PAL 120W Multi Color Dual Zone Remote Control Transformer (Model: 64-PCR-3D-120). This device is engineered to power and control multi-color LED lighting systems, offering advanced dual-zone functionality for versatile and dynamic lighting solutions in various applications.
2. Безбедносне информације
УПОЗОРЕЊЕ: Непоштовање ових безбедносних упутстава може довести до пожара, струјног удара, повреде или оштећења производа или имовине.
- Always disconnect power at the circuit breaker before installing, servicing, or performing any maintenance on the transformer or connected lighting.
- Инсталацију мора да изврши квалификовани електричар и у складу са свим локалним и националним електричним прописима.
- Do not operate the transformer if it has been damaged in any way.
- Ensure the transformer is installed in a location that is protected from direct water exposure, although the unit is rated IP65 for dust and water jet protection.
- Проверите да ли је залиха волtage matches the transformer's specified input voltage (100-240V AC, 50/60Hz).
- Do not exceed the maximum output power of 120 Watts.
3. Садржај пакета
Please verify that all items listed below are present and undamaged in your package:
- 1 x PAL 120W Multi Color Dual Zone Remote Control Transformer (Model: 64-PCR-3D-120)
- 1 x PAL PCZ-2 Color Touch 2 Zone Remote Control
- 2 x AAA батерије (за даљински управљач)
Image: The PAL 120W Multi Color Dual Zone Remote Control Transformer, its accompanying PCZ-2 remote control, and two AAA batteries. The transformer is a dark grey rectangular unit with connection ports on one side, and the remote is shown in its packaging next to it.
4. Производ је готовview
4.1. Transformer Unit (64-PCR-3D-120)
The main transformer unit is a robust, weather-resistant enclosure designed for outdoor or indoor installation. It converts standard AC line voltage to 24V DC, suitable for PAL LED lighting products. Key features include:
- Улазни волtage: 100-240В АЦ, 50/60Хз
- Снага напајања: 125 Ваттс
- Излазна снага: 120 Watts (24V DC)
- ИП оцена: IP65 (отпоран на прашину и заштићен од млазева воде)
- Сертификати: CE, SELV
4.2. PCZ-2 Color Touch 2 Zone Remote Control
The PCZ-2 remote control allows for intuitive management of your connected LED lighting. It features a color touch wheel for precise color selection and dedicated buttons for controlling two independent lighting zones, brightness, and various lighting modes.
5. Подешавање и инсталација
Before beginning installation, ensure all power is disconnected at the main circuit breaker.
- Монтажа: Select a suitable, secure location for the transformer. Mount the unit vertically using appropriate fasteners, ensuring adequate ventilation around the enclosure.
- Улазно ожичење: Connect the AC input power (100-240V AC) to the designated input terminals on the transformer. Ensure proper polarity (Live, Neutral, Ground) as indicated on the unit. Use appropriate gauge wiring for the power requirements.
- Излазно ожичење: Connect your 24V DC PAL LED lighting fixtures to the output terminals. The transformer supports two independent zones. Ensure correct polarity (+ and -) for each lighting fixture. Refer to your lighting fixture's manual for specific wiring diagrams.
- Батерије за даљински управљач: Open the battery compartment on the PCZ-2 remote control and insert the two AAA batteries, observing the correct polarity.
- Укључено: Када су све везе безбедне и проверене, вратите напајање на прекидачу.
6. Упутство за употребу
6.1. Упаривање даљинског управљача
The PCZ-2 remote control should be pre-paired with the transformer. If pairing is lost or a new remote is introduced:
- Ensure the transformer is powered on.
- Within 5 seconds of powering on the transformer, press and hold the 'Zone 1 ON' button on the remote control for approximately 3 seconds. The connected lights should flash to confirm successful pairing.
- Repeat for 'Zone 2 ON' button if you wish to pair the second zone.
6.2. Basic Remote Functions
- Укључивање/искључивање: Press the 'ON' or 'OFF' buttons for each zone to toggle power.
- Избор боја: Use the color touch wheel to select desired static colors.
- Контрола осветљења: Use the brightness up/down buttons to adjust the intensity of the selected color or mode.
- Избор режима: Cycle through pre-programmed lighting modes (e.g., color changing, fading) using the 'Mode' button.
- Контрола зоне: Independently control Zone 1 and Zone 2 using their respective buttons.
7. Одржавање
- Чишћење: Periodically clean the exterior of the transformer and remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- инспекција: Regularly inspect wiring connections for any signs of wear, corrosion, or damage. Ensure all connections remain secure.
- Замена батерије: Replace the AAA batteries in the remote control when its performance degrades or it stops responding.
КСНУМКС. Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| No power to lights | No AC input power; Loose wiring; Faulty transformer | Check circuit breaker; Verify all wiring connections; Contact support if transformer is faulty. |
| Даљински не реагује | Dead batteries; Remote not paired; Obstruction | Replace batteries; Re-pair remote (see Section 6.1); Ensure clear line of sight. |
| Светла трепере или пригушују | Overloaded circuit; Loose connections; Faulty LED fixture | Reduce load (ensure total wattage is below 120W); Check wiring; Test individual fixtures. |
9. Спецификације
| Феатуре | Спецификација |
|---|---|
| Модел | 64-PCR-3D-120 |
| Димензије производа | 12.5 к 7.3 к 5.3 инча |
| Суппли Волtage | 100-240В АЦ, 50/60Хз |
| Суппли Повер | 125 Ваттс |
| Излазна снага | 120 Watts (24V DC) |
| ИП Ратинг | ИП65 |
| Произвођач | PAL PRODUCTS, INC. |
| ASIN | B0CSBSTC8W |
| Датум првог доступног | 14. јануара 2024. године |
10. Гаранција и подршка
This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official PAL Lighting website for detailed warranty terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact PAL Lighting customer service directly. Contact information can typically be found on the manufacturer's webсајт или паковање производа.
