FLEXISPOT E6 MAX Dual Motor 3 Stages Standing Desk User Manual

Увод

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT E6 MAX Dual Motor 3 Stages Standing Desk. Please read this manual thoroughly before assembly and use to ensure proper function and safety.

Безбедносне информације

УПОЗОРЕЊЕ:

Exceeding the maximum weight recommendation of 352 pounds may cause damage or pose a safety risk. Ensure the desk is not overloaded. Keep children and pets away from the desk during height adjustments to prevent injury due to the anti-collision function.

Садржај пакета

Пре почетка монтаже, проверите да ли су сви делови присутни и да ли су неоштећени. Пакет обично садржи:

• Whole-piece Desktop (55"x28" Special Walnut)
• Desk Frame (Black) with Dual Motors
• 3-Сtage Lifting Columns (2)
• Feet/Bases (2)
• Control Panel with LCD screen and backlit buttons
• Адаптер за напајање и каблови
• Опрема за монтажу (шрафови, имбус кључ)
• Complimentary Accessories: Velcro Straps, Set of Wheels, Cable Manager

Image: All components of the FlexiSpot E6 MAX standing desk laid out for assembly, including the desktop, frame parts, and accessories.

Упутства за подешавање

Assembly is straightforward and can typically be completed by one person in approximately 30 minutes. A power drill is recommended for some steps, though a hand screwdriver can also be used.

1. Распакујте компоненте: Carefully remove all parts from the two shipping boxes. One box contains the desktop, and the other contains the frame and accessories.
2. Assemble Support Beams: Connect the three pieces of each support beam by sliding the outer sections together and tightening them securely.
3. Attach Lifting Columns: Securely attach the lifting columns to the assembled support beams using the provided Allen wrench and screws. Each side requires four screws.
4. Install Feet/Bases: Screw the feet onto the bottom of the lifting columns using the Allen wrench. Optionally, swap the feet for the included wheels for easier mobility.
5. Position Desktop: Place the desktop upside down on a clean, soft surface. Carefully align the assembled desk frame onto the pre-drilled holes on the underside of the desktop.
6. Install Control Box and Keypad: Mount the control box and keypad to the designated areas on the underside of the desktop using screws.
7. Повежите ожичење: Connect all necessary wires from the motors, control panel, and power adapter to the control box. Ensure all connections are secure.
8. Управљање кабловима: Use the included Velcro straps and cable manager to organize and secure all cables neatly under the desk.

Image: The three-stage leg mechanism allows for continuous height adjustment, accommodating various user heights.

Image: Included accessories like Velcro straps, wheels, and a cable manager assist in organizing your workspace.

Упутство за употребу

Your FLEXISPOT E6 MAX desk features intuitive controls for seamless height adjustment.

Подешавање висине

• The desk adjusts from a minimum height of 24.4 inches to a maximum height of 50 inches.
• Користите Горе (▲) и Доле (▼) arrow buttons on the control panel to manually adjust the desk height.

Programmable Memory Settings

The control panel features four programmable memory buttons (1, 2, 3, 4) to save your preferred sitting and standing heights.

1. Подесите сто на жељену висину помоћу дугмади горе/доле.
2. Притисните тастер M дугме. На дисплеју ће се приказати „S-“.
3. Immediately press one of the numbered memory buttons (1, 2, 3, or 4) to save the current height. The display will confirm the setting.
4. To recall a saved height, simply press the corresponding numbered memory button. The desk will automatically move to that position.

Функција против судара

The desk is equipped with a sensitivity mode that detects obstacles during height adjustment. If the desk encounters an object, it will automatically stop and reverse slightly to prevent damage or injury.

Image: The intuitive control panel features an LCD screen, up/down arrows, and four memory settings for quick adjustments.

Одржавање

Редовно одржавање осигурава дуготрајност и оптималне перформансе вашег стола за стајање.

• Чишћење: Обришите радну површину и оквир меком крпомamp крпом. Избегавајте абразивна средства за чишћење или јаке хемикалије које би могле оштетити завршну обраду.
• Управљање кабловима: Periodically check and re-secure cables using the provided Velcro straps or cable manager to prevent tangles and damage.
• Провера мотора: Listen for any unusual noises during operation. If you notice any issues, refer to the troubleshooting section or contact customer support.
• Дистрибуција тежине: Ensure weight is evenly distributed on the desktop to prevent strain on the motors and frame.

Решавање проблема

If you encounter issues with your FLEXISPOT E6 MAX desk, try the following common troubleshooting steps:

• Сто се не помера: Check all power connections. Ensure the power cable is securely plugged into both the desk and the wall outlet.
• Код грешке на екрану: Refer to the specific error code in the full product manual (not provided here) or contact customer support for guidance.
• Неравномерно кретање: Ensure the desk is on a level surface. Check for any obstructions under the desk that might impede movement.
• Ресет функција: If the desk is unresponsive, unplug it from the power outlet for 10-15 seconds, then plug it back in. This may reset the system.

Спецификације

Image: The desk's robust construction supports up to 330 lbs, providing a sturdy workstation.

Image: Detailed dimensions of the desktop (55"x28") and the adjustable height ranges for the desk frame.

Гаранција

FLEXISPOT offers a comprehensive warranty for your peace of mind:

• Двогодишње покриће: Applies to the desk frame and motors.
• 2-Year Protection: Applies to the control panel and electronics.

For any warranty claims or assistance, please contact FLEXISPOT customer support.

Корисничка подршка

For further assistance, technical support, or inquiries regarding your FLEXISPOT E6 MAX Standing Desk, please contact the manufacturer directly. Refer to the contact information provided with your product packaging or visit the official FLEXISPOT webсајту.

Такође можете посетити FLEXISPOT Store on Amazon за више информација и ресурса за подршку.