1. Увод
The ABSINA Mobile Wallbox 11 kW 16A is a versatile and portable charging solution for electric vehicles. Designed for both home and travel use, it offers convenient and safe charging with integrated app control and RFID activation. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your device.
Figure 1: ABSINA Mobile Wallbox 11 kW 16A. This image shows the compact design of the wallbox with its CEE plug and Type 2 charging connector.
2. Безбедносна упутства
Пажљиво прочитајте сва безбедносна упутства пре употребе уређаја. Непоштовање ових упутстава може довести до струјног удара, пожара или озбиљних повреда.
- Ensure the power supply meets the specified requirements (3 phases 415 V 50/60 Hz).
- Немојте користити уређај ако су кабл или утикач оштећени.
- Не покушавајте сами да отворите или поправите уређај. За сервис контактирајте квалификовано особље.
- Keep the device away from water and extreme temperatures. The device is IP65 rated, but avoid submersion.
- Always ensure proper grounding.
- The integrated Type A+DC6 mA residual current circuit breaker provides enhanced safety. Do not bypass or modify it.
- Before installation, contact your local grid operator to register the wallbox as required.
Figure 2: Maximum Safety Features. The image highlights the Type A 30mA AC residual current protection and Type B 6mA DC fault current protection for enhanced user safety.
3. Садржај пакета
Проверите да ли су све ставке присутне у пакету:
- ABSINA Mobile Wallbox 11 kW 16 A (three-phase)
- 3 x RFID Chips
- 3 к РФИД картице
- Носач за монтирање на зид
- Материјал за монтажу (вијци, типле)
- Кориснички приручник (овај документ)
4. Подешавање и инсталација
The ABSINA Mobile Wallbox is designed for "Plug and Play" use, requiring no complex installation. However, for permanent mounting, a wall bracket is included.
4.1 Почетно подешавање (Plug and Play)
- Повежите се са напајањем: Insert the CEE plug of the Wallbox into a compatible 3-phase 415 V 50/60 Hz CEE socket.
- Укључено: The Wallbox will power on automatically. If the indicator light blinks red, press the emergency stop button once to reset.
- Спреман за употребу: The Wallbox is now ready for charging, which can be activated via RFID or the app.
Figure 3: Plug & Play Functionality. This image illustrates the simple connection of the CEE plug to a power outlet, emphasizing ease of use without complex electrical installation.
4.2 Монтажа на зид (опционо)
For a more permanent setup, use the provided wall mount bracket and hardware.
- Изаберите локацију: Select a suitable wall location near a compatible CEE socket, ensuring adequate ventilation and protection from direct weather exposure (though the unit is IP65 rated).
- Означите тачке бушења: Use the wall mount bracket to mark the drilling points on the wall.
- Избушене рупе: Drill holes at the marked points and insert the provided anchors.
- Сигурносни носач: Attach the wall mount bracket to the wall using the screws.
- Mount Wallbox: Carefully slide the Wallbox onto the mounted bracket until it clicks securely into place.
Figure 4: Easy Operation. The image shows the Wallbox mounted on a wall, connected to a vehicle, demonstrating its simple "Connect. Charge." principle.
5. Упутство за употребу
5.1 Charging Your Electric Vehicle
- Connect Vehicle: Plug the Type 2 charging cable from the Wallbox into your electric vehicle's charging port.
- Activate Charging:
- Using RFID: Hold one of the provided RFID chips or cards over the RFID reader area on the Wallbox. The Wallbox will activate, and charging will begin.
- Коришћење апликације: Open the ABSINA app (or compatible smart home app like Tuya Smart) on your smartphone. Select the Wallbox and initiate charging from the app interface.
- Пуњење монитора: The app provides real-time data including charging voltage (V), current (A), power (kW), charged energy (kWh), and charging time.
- Заустави пуњење:
- Using RFID: Hold the RFID chip/card over the reader again to stop charging.
- Коришћење апликације: Stop charging directly from the app.
- Disconnect Vehicle: Once charging is complete or stopped, unplug the Type 2 cable from your vehicle.
Figure 5: Misuse Protection. The image shows a hand activating the Wallbox with an RFID chip, illustrating the secure activation method.
5.2 Функције контроле апликација
The dedicated app (or compatible smart home app) provides advanced control and monitoring capabilities:
- Подесите струју пуњења: Set the charging current from 8 A to 16 A in 1 A increments to manage charging speed.
- Set Charging Mode: Choose preferred charging modes.
- Распоред пуњења: Utilize the charging delay function to start charging at a later time.
- Monitor Real-time Data: View live charging statistics.
- Даљинско покретање/заустављање: Control charging sessions from your smartphone.
Напомена: While the app displays charging data, this data is typically not stored permanently on the device once the charging cable is disconnected. For historical charging data, refer to your vehicle's own app if available.
6. Одржавање
To ensure the longevity and optimal performance of your ABSINA Mobile Wallbox, follow these maintenance guidelines:
- Чишћење: Wipe the exterior of the Wallbox with a soft, damp крпа. Не користите абразивна средства за чишћење или раствараче. Уверите се да је уређај искључен из струје пре чишћења.
- Инспекција каблова: Regularly inspect the charging cable and CEE plug for any signs of damage, fraying, or wear. If damage is found, discontinue use immediately and contact support.
- Одржавање конектора: Keep the Type 2 connector clean and free of debris. Ensure the protective cap is in place when not in use.
- Складиштење: When not in use, especially during travel, store the Wallbox in a dry, cool place, protected from direct sunlight and extreme temperatures.
Figure 6: Mobile Wallbox for Travel. This image shows the Wallbox conveniently stored in a car trunk, highlighting its portability and ease of transport.
КСНУМКС. Решавање проблема
If you encounter issues with your ABSINA Mobile Wallbox, refer to the following common problems and solutions:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Wallbox does not power on. | No power from CEE socket; CEE plug not fully inserted; internal fault. | Check CEE socket power supply; ensure plug is fully inserted; try a different CEE socket if available. |
| Пуњење не започиње. | RFID not read correctly; app connection issue; vehicle not ready to charge; emergency stop engaged. | Ensure RFID chip/card is held correctly; check app connection and Wallbox status; ensure vehicle is ready to accept charge; press emergency stop button once to reset. |
| Charging stops unexpectedly. | Overload protection activated; vehicle charging complete; power interruption. | Check for error codes on Wallbox/app; verify vehicle charging status; check CEE socket power. |
| App not connecting to Wallbox. | Wi-Fi signal weak; incorrect app settings; Wallbox not in pairing mode. | Ensure strong Wi-Fi signal at Wallbox location; restart app and Wallbox; refer to app's pairing instructions. |
If the problem persists after attempting these solutions, please contact ABSINA customer support.
8. Спецификације
| Феатуре | Детаљ |
|---|---|
| Бранд | АБСИНА |
| Број модела | 301018 |
| Снага пуњења | 11 кВ |
| Цхаргинг Цуррент | Adjustable 8 A to 16 A |
| Фазе | 3-фаза |
| Улазни волtage | 415 В АЦ |
| Фреквенција | 50/60 Хз |
| Тип конектора | Type 2 (output), CEE 16A (input) |
| Заштитна класа | ИПКСНУМКС (водоотпоран) |
| Сигурносне карактеристике | Integrated Type A+DC6 mA RCD, Overvoltagе, Ундерволtage, Overload, Temperature, Short-circuit protection |
| Оцена запаљивости | УЛ94В-0 |
| Тежина артикла | 2.25 килограма |
| Димензије производа (Д к Ш к В) | 25.7 к 15.3 к 9.5 цм |
| Стандби Цонсумптион | < 3 В |
9. Гаранција и подршка
ABSINA products are designed for reliability and performance. For warranty information and technical support, please refer to the official ABSINA webсајт или директно контактирајте њихову корисничку службу.
The manufacturer, ABSINA GmbH, is based in Germany and is committed to providing competent support.
Контакт информације: Please visit the official ABSINA webсајт за најновије контакт информације за корисничку подршку и рекламације.
