Baseus BS-CH001

Baseus BS-CH001 10000mAh Car Jump Starter and Power Bank User Manual

Model: BS-CH001

Увод

The Baseus BS-CH001 is a versatile device designed to provide emergency jump-starting for 12V vehicles and serve as a portable power bank for charging electronic devices. With a 10000mAh capacity and a peak current of 1000A, it offers a reliable solution for unexpected car battery issues and on-the-go power needs. This manual provides essential instructions for safe and effective use.

Note: Product images and videos are not included in this manual due to a discrepancy between the product description and the available media assets.

Садржај пакета

Молимо вас да проверите пакет за следеће ставке:

Кључне карактеристике

Безбедносне информације

Please read all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

Setup: Charging the Jump Starter

Before first use, fully charge the jump starter. It is recommended to charge the device every 3-6 months to maintain battery health, even when not in use.

  1. Connect the provided USB to Type-C charging cable to the Type-C input port on the jump starter.
  2. Connect the other end of the USB cable to a suitable USB power adapter (e.g., 5V/2.4A, not included).
  3. The digital display will show the charging progress. Charge until the display indicates 100%.
  4. Када се потпуно напуни, искључите кабл за пуњење.

Operating Instructions: Car Jump Starting

Follow these steps carefully to jump start your vehicle:

  1. Step 1: Connect the Smart Clamp Кабл

    Insert the smart jump starter clamp cable into the EC5 interface of the Baseus jump starter. The flashing red and green lights on the clamp indicate it's ready for connection to the car battery.

  2. Step 2: Connect to Car Battery

    Open your car's hood. Connect the red positive (+) clamp to the positive (+) terminal of your car battery. Connect the black negative (-) clamp to the negative (-) terminal of your car battery. Ensure a secure connection.

  3. Step 3: Start the Vehicle

    Return to your car and start the engine. If the car does not start immediately, wait a few seconds and try again. Do not crank the engine for more than 3 seconds at a time, and wait at least 30 seconds between attempts.

  4. Корак 4: Прекините везу

    Once the car engine starts, immediately remove the smart jump starter clamp cable from the car battery terminals, then disconnect it from the jump starter. Do not drive with the jump starter connected.

Operating Instructions: Power Bank Function

The Baseus BS-CH001 can also be used to charge your electronic devices.

  1. Connect your device's charging cable (e.g., USB to Type-C, USB to Lightning) to the USB output port on the jump starter.
  2. Повежите други крај кабла са вашим електронским уређајем.
  3. The jump starter will automatically begin charging your device. The digital display will show the remaining power.
  4. Once charging is complete, disconnect your device and the cable.

Одржавање

Решавање проблема

ПроблемМогући узрокРешење
Уређај се не укључује.Батерија је празна.Потпуно напуните стартер.
Car does not start.Нетачан цлamp везу.Osigurati clamps are connected to the correct battery terminals (red to +, black to -).
Car does not start.Car battery is severely damaged or frozen.Consult a professional mechanic. Do not attempt to jump start a frozen battery.
Device gets hot during use.Normal operation during high current discharge.This is normal. If it becomes excessively hot or emits smoke, discontinue use immediately.
Electronic device not charging.Jump starter battery low or cable issue.Ensure jump starter is charged. Check if the charging cable is properly connected and functional.

Спецификације

БрандБасеус
МоделБС-ЦХ001
Капацитет10000 мАх / 3.7 В / 37 Вх
Улазни волtage (Type-C)5В/2.4А (макс.)
УСБ излазна снага5В/2.4А (макс.)
Старт Волtage12В
Стартинг Цуррент500А
Пеак Цуррент1000А
Тежина470г
Димензије10 x 5 x 5 цм (приближно, на основу описа производа)

Гаранција и подршка

This product comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Baseus website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Baseus customer service through their official channels.

Note: No specific warranty period or support contact information was provided in the product data. Please refer to the manufacturer's official resources.