1. Увод
The M-VAVE SK2 is an isolated power supply unit designed for guitar effect pedals. It provides stable and low-noise power to multiple pedals simultaneously, ensuring optimal performance. This unit features independent power outputs and overcurrent protection for each channel, enhancing reliability and safety for your equipment.
Image 1.1: M-VAVE SK2 Isolated Guitar Pedal Power Supply.
2. Карактеристике
- 10 Isolated 9V DC Outputs: Provides clean and stable power to individual pedals, minimizing noise and interference. Each output delivers 300mA.
- 1 USB 5V Output: Dedicated 5V 1A USB output for powering compatible devices or charging.
- Independent Overcurrent Protection: Each output channel is equipped with independent overcurrent protection. If one channel experiences a short circuit, other channels remain operational.
- ЛЕД индикатори статуса: Blue LED lights indicate the operational status of each channel. An LED will turn off if its corresponding channel experiences an overcurrent condition.
- Noise Reduction Circuit Design: Engineered to minimize unwanted noise, contributing to a superior audio experience.
- Издржљива конструкција: Made from lightweight and robust aluminum alloy.
Слика 2.1: Готовоview of the 11 independent power supply interfaces.
Image 2.2: Short circuit protection with LED indicators for normal operation and short circuit.
3. Садржај пакета
Проверите да ли су све ставке присутне у пакету:
- M-VAVE SK2 Isolated Guitar Pedal Power Supply Unit
- Power Adapter (DC 12V 2A input)
- 10 x DC Power Cables (for connecting pedals)
Image 3.1: M-VAVE SK2 unit with its accessories.
4. Подешавање
- Повежите адаптер за напајање: Plug the provided DC 12V 2A power adapter into the 'DC IN' port on the M-VAVE SK2 unit. Connect the other end of the adapter to a suitable power outlet.
- Connect Effect Pedals: Use the included DC power cables to connect your guitar effect pedals to the 10 isolated 9V DC outputs. Ensure the polarity of the cables matches your pedals' requirements (center negative is standard for most guitar pedals).
- Повежите УСБ уређаје (опционо): If needed, connect a USB-powered device to the 5V 1A USB output port.
- Укључено: Once all connections are secure, the blue LED indicators on the M-VAVE SK2 unit will illuminate, indicating that power is being supplied to the connected channels.
5. Операција
The M-VAVE SK2 operates automatically once connected to power and your pedals. Each blue LED light corresponds to an output channel. When a channel is functioning correctly, its LED will be lit. In the event of an overcurrent or short circuit on a specific channel, its corresponding LED light will turn off, indicating a fault without affecting the operation of other channels.
6. Безбедносне информације
- Use only the provided power adapter. Using an incorrect adapter may damage the unit or connected devices.
- Не излажите уређај води, влази или екстремним температурама.
- Избегавајте испуштање или излагање уређаја јаким ударцима.
- Do not attempt to open or modify the unit. Refer servicing to qualified personnel.
- Обезбедите одговарајућу вентилацију око уређаја током рада.
КСНУМКС. Решавање проблема
- No power to a pedal:
- Check if the LED indicator for that specific output channel is off. If it is, disconnect the pedal from that output and check the pedal for faults. The LED turning off indicates an overcurrent or short circuit on that channel. Reconnect the pedal only after resolving the issue.
- No power to any pedal:
- Ensure the power adapter is securely connected to both the M-VAVE SK2 unit and a working power outlet. Verify that the power adapter itself is functional.
- Unwanted noise in the audio signal:
- While the SK2 features noise reduction, external factors can still introduce noise. Ensure all cables are properly shielded and connected. Test pedals individually to identify if a specific pedal is generating noise. Check for ground loops in your setup.
8. Спецификације
| Параметар | Валуе |
|---|---|
| Број модела | СК2 |
| Повер Инпут | DC 5V-12V (via 12V 2A adapter) |
| ДЦ излазни канали | 10 x DC 9V 300mA (isolated) |
| USB Output Channel | 1 к УСБ 5В 1А |
| Димензије производа (Д к Ш к В) | 4 к 1.9 к 6 инча (158 к 50 к 25 мм) |
| Тежина артикла | 1.15 фунти (225 г) |
| Грађевински материјал | Алуминијумска легура |
| Метод хлађења | Ваздух |
| Компатибилни уређаји | Педале за гитарске ефекте |
Image 8.1: Dimensions of the M-VAVE SK2 unit.
Слика 8.2: Горња и бочна страна view of the M-VAVE SK2 unit.
9. Одржавање
- Чишћење: Користите меку, суву крпу за чишћење спољашњости уређаја. Не користите течна средства за чишћење или раствараче.
- Складиштење: Чувајте уређај на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура када се не користи.
- Управљање кабловима: Ensure power cables are not kinked or strained to prevent damage.
10. Гаранција и подршка
The M-VAVE SK2 Isolated Guitar Pedal Power Supply comes with a one-year warranty from the date of purchase. For any product-related issues or support inquiries, please contact M-VAVE customer service. When contacting support, provide your purchase details and a clear description of the issue.
