VALLOR HL-121Pro Compressed Air Duster & Vacuum User Manual

Увод

Thank you for choosing the VALLOR HL-121Pro Compressed Air Duster & Vacuum. This device is designed for efficient and versatile cleaning across various environments, including computers, cars, homes, and offices. Please read this manual thoroughly before operating the device to ensure safe and optimal performance. Keep this manual for future reference.

Важна безбедносна упутства

• Do not operate the device while charging.
• Држите уређај даље од воде и влаге.
• Do not point the air duster directly at people or animals.
• Avoid blocking the air inlet or outlet during operation.
• Store the device in a cool, dry place, out of reach of children.
• Use only the provided Type C charging cable and a compatible 5V/1-2A adapter.
• Не покушавајте сами да раставите или поправите уређај. Обратите се корисничкој подршци за помоћ.
• The device is equipped with overheat protection (up to 302°F). If it overheats, allow it to cool down before further use.

Садржај пакета

Проверите да ли су све ставке наведене у наставку укључене у ваш пакет:

• VALLOR HL-121Pro Compressed Air Duster & Vacuum Unit
• Подна четка
• Млазница за дување
• Млазница на надувавање
• Усисна млазница
• Air Bleed Nozzle
• Brush Suction Nozzle
• Кабл за пуњење типа Ц
• Filter Element (pre-installed or spare)
• Pumping Storage Bags (for vacuum sealing)

Image: The VALLOR HL-121Pro unit displayed with its various nozzles, brushes, Type C cable, filter element, and pumping storage bags.

Сетуп

1. Почетна наплата: Before first use, fully charge the device. Connect the Type C charging cable to the device and a 5V/1-2A power adapter. The charging indicator will show progress. A full charge takes approximately 3 hours.
2. Причврстите млазницу/додатак: Select the appropriate nozzle or accessory for your cleaning task. Align the accessory with the device's air outlet (for duster mode) or air inlet (for vacuum mode) and push firmly until it clicks into place.

Image: The VALLOR HL-121Pro unit disassembled, showing the main body, dust cup, and various nozzles and brushes ready for attachment.

Упутство за употребу

Укључивање/искључивање и подешавање брзине

The device features a touch control method for power and speed settings.

• За укључивање: Press and hold the power button for a few seconds. The device will start in the lowest speed setting.
• Да бисте подесили брзину: Briefly press the power button to cycle through the available speed modes.
• За искључивање: Поново притисните и држите дугме за напајање док се уређај не искључи.

Режим ваздушне прашине

For blowing dust and debris, attach the desired blow nozzle to the front air outlet. The device offers three wind modes:

• Gear 1 (50,000 RPM): Low speed, suitable for delicate items and light dusting.
• Gear 2 (80,000 RPM): Medium speed, for partial cleaning and general use.
• Gear 3 (100,000 RPM): High speed, for wide-area cleaning and stubborn dust.

Image: The VALLOR HL-121Pro demonstrating its three wind speed settings (50,000 RPM, 80,000 RPM, 100,000 RPM) for various dusting tasks.

Вакуумски режим

For suctioning debris, attach the desired suction nozzle to the rear air inlet. The device offers three suction levels:

• Level 1 (9,000 PA): Provides up to 40 minutes of continuous use.
• Level 2 (13,000 PA): Provides up to 30 minutes of continuous use.
• Level 3 (18,000 PA): Provides up to 20 minutes of continuous use.

Empty the dust collection cup regularly to maintain optimal suction performance.

Свестране апликације

The VALLOR HL-121Pro is suitable for a wide range of cleaning tasks:

• Computer & Electronics: Dusting keyboards, PC components, and other sensitive electronics.
• Унутрашњост аутомобила: Vacuuming crumbs and debris, dusting vents and dashboards.
• Home & Office: Cleaning small spills, dusting furniture, and hard-to-reach areas.
• инфлација: Using the inflatable nozzle for small inflatables.
• Fire Aid: Can be used to fan small fires (use with caution and appropriate safety measures).

Image: The VALLOR HL-121Pro in action, demonstrating its use for cleaning a car interior and dusting inside a computer tower.

Пуњење уређаја

The VALLOR HL-121Pro is equipped with a 7,500 mAh battery. To charge:

1. Connect the provided Type C charging cable to the charging port on the device.
2. Plug the other end of the cable into a compatible 5V/1-2A USB power adapter (e.g., laptop charger, wall adapter, power bank, car charger).
3. The charging indicator will illuminate or change color to show that charging is in progress.
4. A full charge takes approximately 3 hours. The indicator will change again when charging is complete.

Note: The device cannot be used while it is charging.

Image: The VALLOR HL-121Pro connected via its Type C cable to a wall adapter, illustrating the charging process.

Одржавање

Чишћење посуде за прашину и филтера

Regular cleaning of the dust cup and filter is essential for maintaining optimal suction power and device longevity.

1. Одвојите посуду за прашину: Twist or unlatch the dust cup from the main body of the device.
2. Уклони филтер: Carefully remove the filter element from the dust cup.
3. Празан отпад: Empty all collected debris from the dust cup into a waste bin.
4. Очисти филтер: Rinse the filter element under running water. Ensure all dust and particles are removed. You may use a soft brush if necessary.
5. Темељно осушите: Allow the filter to air dry completely before reinserting it. Do not use the device with a wet filter.
6. Поново саставите: Once the filter is dry, place it back into the dust cup and reattach the dust cup to the main unit, ensuring it is securely fastened.

Решавање проблема

Спецификације

Гаранција и корисничка подршка

VALLOR products are manufactured to high-quality standards. For warranty information, technical support, or any questions regarding your HL-121Pro device, please contact our customer support team.

Please refer to your purchase documentation or the VALLOR official webсајт за конкретне услове гаранције и контакт податке.