Увод
Thank you for choosing the Hbada E2 Ergonomic Office Chair. This manual provides detailed instructions for assembly, operation, and maintenance to ensure you get the most comfortable and healthy experience from your new chair. Please read this manual thoroughly before assembly and use.
Безбедносне информације
Always follow the instructions provided with the chair for proper assembly and use. Be cautious when adjusting the chair's position, especially when reclining, to avoid injury. Do not exceed the maximum weight capacity of the chair.
Садржај пакета
Before beginning assembly, ensure all parts are present and undamaged. Refer to the included parts list for a complete overview.
- Chair Base with Wheels
- Цилиндар за гас лифт
- Сеат Ассембли
- Склоп наслона за леђа
- Наслон за главу
- Наслони за руке (леви и десни)
- Footrest (if applicable to your model)
- Опрема за монтажу (шрафови, подлошке, имбус кључ)
- Упутство за употребу
Упутство за монтажу
Assembly typically takes about 30 minutes and requires only the provided Allen wrench. Follow these steps carefully:
- Assemble the Chair Base: Insert the wheels into each leg of the chair base. Ensure they are securely fitted.
Image: The chair base with its five legs and wheels, ready for assembly.
- Install the Gas Lift Cylinder: Insert the air pneumatic cylinder into the center hole of the assembled chair base.
- Attach the Footrest (if applicable): If your model includes a footrest, attach it to the underside of the seat assembly as per the specific instructions. The footrest is designed to slide out and fold for use.
- Причврстите наслоне за руке: Screw both armrests to the underside of the seat assembly. Ensure they are firmly secured.
Image: Close-up of the chair's underside, indicating where armrests are screwed into place.
- Причврстите наслон за леђа: Screw the backrest support to the back of the seat assembly.
Image: The backrest assembly being connected to the seat, showing the screw points.
- Connect Seat and Base: Пажљиво поставите склопљено седиште и наслон на цилиндар за подизање гаса, водећи рачуна да буде центриран и стабилан.
- Install the Headrest: Slide the headrest onto the top of the backrest. It should click into place or be secured with a screw, depending on the design.
Image: The headrest component being installed onto the upper part of the chair's backrest.
Упутства за употребу и подешавања
The Hbada E2 chair offers multiple adjustments for personalized comfort:
1. Подешавање висине седишта
To adjust the seat height, locate the lever on the right side beneath the seat. Pull the lever up while seated to lower the chair, or pull it up while standing to raise the chair. Release the lever to lock the height.
2. 6-Way Adjustable Lumbar Support
The backrest features a dynamic lumbar support system. This support can be adjusted in 6 ways:
- Forward and Backward Adjustment: 3 levels of depth adjustment.
- Вертикално подешавање: Move the lumbar support up or down to align with your lower back curve.
- Left-Right Suspension: The floating structure adapts to your movements, providing continuous support.
Image: A detailed diagram showing the 6-way adjustable lumbar support, highlighting its 2.36" up & down, 1.97" front & back, and 10° left & right movement capabilities.
3. 3D Adjustable Armrests
The armrests provide versatile support and can be adjusted in three dimensions:
- Подешавање висине: Up to 7.5 cm (2.95 inches) vertically.
- Forward and Backward Adjustment: Up to 5 cm (1.97 inches) horizontally.
- ротација: Rotate 40 degrees left and right.
Image: A visual guide to the 3D ergonomic armrests, detailing 2.95" up & down, 1.97" front & back, and 40° left & right rotation.
4. 3D Adjustable Headrest and Reclining Function
The headrest and reclining function work together to provide full-body support:
- Подешавање наслона за главу: Adjust vertically up to 10 cm (3.93 inches), forward and backward up to 3 cm (1.57 inches), and rotate 60 degrees to support your neck.
- Функција нагињања: The chair reclines up to 135 degrees with three lockable tilt angles (90°, 115°, 138°). Use the wire-controlled adjustment for one-touch operation without bending down.
Image: A diagram showing the 3D adjustable headrest, indicating 3.93" up & down movement and 60° rotation.
Image: Three illustrations demonstrating the chair's 3-level locking recline feature: 90° for comfortable office work, 115° for leisure, and 138° for short naps.
Слика: Крупни план view of the aluminum alloy wire-controlled adjustment mechanism, designed for easy one-touch operation.
Одржавање
Regular maintenance helps prolong the life and appearance of your Hbada E2 chair:
- Cleaning Mesh Fabric: The breathable mesh fabric can be cleaned with a damp крпом и благим сапуном. Избегавајте јаке хемикалије.
- Чишћење оквира: Wipe the alloy steel frame and plastic components with a soft, damp тканина.
- Одржавање точкова: Periodically check the wheels for hair or debris and clean as needed to ensure smooth movement.
- Затегните причвршћиваче: Every few months, check all screws and bolts to ensure they are tight. Retighten if necessary to maintain stability.
Слика: Увећана view of the Flexmono Dragon Weave Mesh seat cushion, emphasizing its breathable structure for improved air permeability.
Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Столица се не подешава по висини | Квар цилиндра за подизање гаса или полуга није активирана. | Ensure the height adjustment lever is fully engaged. If the issue persists, the gas lift cylinder may need replacement. Contact customer support. |
| Столица се клима или је нестабилна | Лабави шрафови или нераван под. | Проверите и затегните све завртње за монтажу. Уверите се да је столица на равној, равној површини. |
| Armrests are loose | Вијци за монтажу су олабављени. | Tighten the screws securing the armrests to the seat. |
| Наслон се не спушта нити закључава | Recline mechanism is jammed or not engaged. | Ensure the recline lock lever is disengaged to recline. If it doesn't lock, check for obstructions or contact support. |
Спецификације
- Бренд: Хбада
- Модел: E2
- Боја: Црно
- Димензије производа: 30.51"Д к 22.24"Ш к 18.11"В
- Стил леђа: Месх
- Узраст (опис): Адулт
- Стил руке: Padded, 3D Adjustable
- Материјал за пуњење: Месх
- Материјал: Alloy Steel (Frame), Mesh (Seat/Back)
- Број лежећег положаја: 3 (до 135 степени)
- Нагињање: Да
- Фактор форме: Канцеларијска столица
Гаранција и подршка
Hbada is committed to providing high-quality products and customer satisfaction. Your Hbada E2 Ergonomic Office Chair comes with comprehensive support:
- Замена делова: Parts are replaced, not repaired, for covered issues.
- Политика поврата у року од 30 дана: Enjoy a 30-day return period without specific reasons required.
- Оштећено по доласку: Repair and replacement are guaranteed for items damaged during shipping.
- Служба за кориснике: For any questions, issues, or warranty claims, please visit the official Hbada store or contact their customer support directly.
За више информација посетите Hbada Store on Amazon.