Упутство за употребу 3Д скенера Revopoint Mini 2

1. Увод

The Revopoint Mini 2 is a high-precision 3D scanner designed for capturing intricate details of small to medium-sized objects. Utilizing industrial-grade blue light technology, it offers exceptional accuracy and speed, making it suitable for applications such as 3D printing, dental modeling, and industrial design.

This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Revopoint Mini 2 3D Scanner to ensure optimal performance and longevity.

Figure 1: Revopoint Mini 2 3D Scanner, showcasing its design and screen interface.

2. Безбедносне информације

Please read all safety instructions carefully before using the Revopoint Mini 2 3D Scanner. Failure to follow these instructions may result in injury or damage to the device.

• Blue Light Safety: The Mini 2 uses Class 1 industrial blue light, which is considered 100% skin-safe. However, direct exposure to the eyes may cause minor discomfort. Avoid staring directly into the blue light emitters during operation.
• Напајање: Користите само приложени адаптер за напајање. Уверите се да извор напајања одговара јачини звука.tage requirements specified for the device.
• Окружење: Operate the scanner in a clean, dry environment. Avoid exposure to extreme temperatures, humidity, dust, or direct sunlight.
• Руковање: Пажљиво рукујте скенером. Не испуштајте га и не излажите га јаким ударцима.
• Чишћење: Искључите напајање пре чишћења. Користите меку, суву крпу. Не користите течна средства за чишћење или аеросоле.
• Измене: Do not attempt to disassemble, repair, or modify the scanner. Unauthorized modifications will void the warranty and may cause harm.

3. Шта је у кутији

Након отварања паковања, проверите да ли су присутне све следеће компоненте:

• Revopoint Mini 2 3D Scanner

Note: Additional accessories such as tripods, turntables, calibration boards, and USB cables may be included depending on the specific package purchased, as depicted in Figure 2.

Figure 2: Typical contents of the Revopoint Mini 2 package, including the scanner and various accessories.

4. Водич за подешавање

Follow these steps to set up your Revopoint Mini 2 3D Scanner:

1. Распакујте скенер: Пажљиво извадите скенер и сву додатну опрему из паковања.
2. Прикључак за напајање: Connect the provided power adapter to the scanner and a suitable power outlet.
3. Инсталација софтвера: Download and install the latest version of the RevoScan software from the official Revopoint website onto your computer or mobile device. The software is essential for operating the scanner and processing scan data.
4. Повежите се са уређајем: Connect the Mini 2 scanner to your computer or mobile device using the provided USB Type-C cable. Ensure a stable connection.
5. Почетна калибрација: For optimal accuracy, perform an initial calibration using the provided calibration board as instructed by the RevoScan software. This step ensures precise measurements.

Figure 3: The Revopoint Mini 2 scanner, ready for connection and software setup.

5. Упутство за употребу

The Revopoint Mini 2 is designed for efficient and precise 3D scanning. Here are key aspects of its operation:

5.1 Scanning Principles

• Прецизност: The scanner achieves a single-frame precision of up to 0.02 mm, ideal for capturing fine details.
• брзина: It offers fast capture speeds of up to 16 frames per second (fps), allowing for quick data acquisition.
• Технологија плаве светлости: Industrial-grade blue light technology minimizes interference from ambient light, enhancing accuracy and model quality.
• Један опсег снимања: A larger single capture range of up to 168 x 132 mm improves tracking and scanning of larger objects.
• Color and Texture: An RGB camera with a bigger aperture and Flash LEDs enhances the capture of intricate texture and color details. The 6 Flash LEDs also improve marker recognition for smoother scanning of featureless objects.
• IMU Technology: The integrated IMU (Inertial Measurement Unit) helps remove faulty frames caused by fast movement or shaky hands, improving tracking stability.

5.2 Процес скенирања

1. Prepare the Object: For best results, especially with reflective, transparent, or very dark objects, consider using scanning spray or applying scanning markers.
2. Launch RevoScan: Open the RevoScan software on your connected device.
3. Изаберите режим скенирања: Choose the appropriate scanning mode (e.g., handheld, turntable) and adjust settings like exposure using the software interface or the three tactile buttons on the scanner.
4. Започни скенирање: Begin scanning the object, maintaining a steady distance and movement as guided by the software. The IMU will assist in stable tracking.
5. Review и процес: Након скенирања, поновоview the captured data within RevoScan. The software allows for merging multiple scans, cleaning up data, and exporting the 3D model in various formats.

Figure 4: Scanning a small, intricate object with the Revopoint Mini 2.

Figure 5: The Mini 2's capability to scan larger objects, demonstrating its versatility.

Figure 6: The scanner being used to capture a human form, highlighting its broad application.

Figure 7: Close-up of the Revopoint Mini 2's screen, showing the user interface during a scan.

6. Одржавање

Proper maintenance ensures the longevity and performance of your Revopoint Mini 2 3D Scanner:

• Чишћење сочива: Gently wipe the scanner's lenses and sensors with a soft, lint-free cloth. Avoid abrasive materials or harsh chemicals that could scratch the surfaces.
• Ажурирања софтвера: Regularly check for and install software updates for RevoScan. Updates often include performance improvements, bug fixes, and new features.
• Складиштење: When not in use, store the scanner in its protective case in a cool, dry place, away from direct sunlight and extreme temperatures.
• Нега каблова: Avoid bending or crimping the USB cable excessively, as this can damage the internal wires.

КСНУМКС. Решавање проблема

This section addresses common issues you might encounter with your Revopoint Mini 2 3D Scanner.

8. Спецификације

9. Гаранција и подршка

Revopoint products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Revopoint webсајту.

For technical support, troubleshooting assistance, or inquiries regarding your Revopoint Mini 2 3D Scanner, please contact Revopoint Customer Service. You can find contact information on the official Revopoint webсајт или преко њихове странице продавнице на Амазону:

Visit the Official Revopoint Store on Amazon