ТАЦТАЦАМ Ревеал Сецурити Бок РВ-СБ-В3 Упутство за употребу

Увод

This manual provides essential instructions for the proper installation, use, and maintenance of your TACTACAM Reveal Security Box RV-SB-V3. This accessory is designed to offer an additional layer of protection for your TACTACAM REVEAL cellular trail camera against environmental factors, tampering, and theft. Please read this manual thoroughly before installation to ensure optimal performance and security.

Производ је завршенview

The TACTACAM Reveal Security Box RV-SB-V3 is a robust enclosure constructed from powder-coated steel. It is engineered to house and protect compatible TACTACAM REVEAL cellular cameras. Key features include:

• Durable powder-coated steel construction for enhanced resistance.
• Integrated antenna support for REVEAL X 3.0 and Pro 3.0 cameras.
• Provisions for a padlock to deter unauthorized access.
• Multiple mounting options, including lag bolt and locking cable holes.

Безбедносне информације

Приликом инсталације и употребе, придржавајте се следећих безбедносних упутстава:

• Handle the security box with care to avoid pinching fingers or sharp edges.
• Ensure the mounting surface is stable and capable of supporting the weight of the security box and camera.
• When using lag bolts, confirm there are no hidden electrical wires or plumbing in the mounting location.
• Чувати ван домашаја деце.

Садржај пакета

Проверите да ли су све ставке присутне у пакету:

• 1 x TACTACAM Reveal Security Box RV-SB-V3

Note: Mounting hardware (lag bolts, locking cable, padlock) and the cellular trail camera are sold separately and are not included with the security box.

Подешавање и инсталација

Follow these steps to install your TACTACAM Reveal Security Box and camera:

1. Припремите камеру: Ensure your TACTACAM REVEAL cellular camera is configured and ready for deployment according to its own instruction manual.
2. Уметни камеру: Carefully slide your TACTACAM REVEAL camera into the security box. Ensure the camera's lens, sensors, and antenna (if applicable) align with the corresponding openings in the box.
3. Обезбедите кутију:
   • Using Lag Bolts (not included): Position the security box against the desired mounting surface (e.g., tree, post). Mark the locations for the lag bolt holes. Drill pilot holes if necessary, then secure the box using appropriate lag bolts.
   • Using a Locking Cable (not included): Thread a locking cable through the designated cable holes on the security box and around the mounting surface. Secure the cable with its locking mechanism.
4. Add Padlock (optional, not included): For additional security, insert a padlock through the designated padlock hole on the security box.
5. Коначна провера: Verify that the security box is firmly mounted and the camera is securely seated within it.

This image displays the TACTACAM Reveal Security Box, a durable powder-coated steel enclosure designed to protect cellular trail cameras. The front features an opening for the camera lens and sensors, while the sides include ventilation and mounting holes. The bottom has a hole for a padlock and mounting options.

Компатибилност

The TACTACAM Reveal Security Box RV-SB-V3 is compatible with the following TACTACAM REVEAL cellular trail camera models:

• REVEAL Pro 3.0
• REVEAL X
• ОТКРИТИ X 2.0
• ОТКРИТИ X 3.0
• REVEAL X-Pro
• REVEAL XB

Одржавање

The TACTACAM Reveal Security Box requires minimal maintenance:

• Periodically inspect the security box and mounting hardware for any signs of wear, damage, or loosening.
• Clean the exterior of the box with a damp cloth to remove dirt or debris. Avoid abrasive cleaners.
• Ensure the padlock (if used) remains functional and lubricated if exposed to harsh weather.

Решавање проблема

If you encounter issues with your security box, consider the following:

• Camera does not fit: Ensure you are using a compatible TACTACAM REVEAL camera model as listed in the Compatibility section. Do not force the camera into the box.
• Box feels loose after mounting: Re-check all mounting points. Tighten lag bolts or re-secure the locking cable. Ensure the mounting surface is stable.
• Difficulty accessing camera controls/battery: The security box is designed for protection. For battery changes or extensive camera adjustments, the camera may need to be temporarily removed from the box.

Спецификације

Подршка

For further assistance, technical support, or warranty inquiries, please visit the official TACTACAM website or contact their customer service department. Refer to your product packaging or the TACTACAM webсајт за актуелне контакт информације.