1. Увод и крајview
The RADIOMASTER MT12 is an advanced open-source surface radio controller, designed for a wide range of RC surface models including cars, trucks, and boats. It is officially supported by EdgeTX, ExpressLRS, and the Multi-module project, offering extensive customizability and versatile operation.
This manual provides essential information for setting up, operating, and maintaining your MT12 controller to ensure optimal performance and longevity.
2. Карактеристике производа
- Internal RF Modules: Available with built-in ExpressLRS or 4in1 Multi-Protocol (MPM) RF modules.
- процесор: Features a powerful STM32F407VGT6 with 1MB Flash.
- Оперативни систем: Preinstalled with EdgeTX firmware for advanced mixing and programmability.
- Пуњење: QC3.0 fast charging supporting 2.0A MAX via USB-C.
- Ергономија: Compact design with excellent ergonomics for comfortable handling.
- Одељак за батерије: Oversized compartment supports 2 x 18650 cells or a 2S 7.4V 5000mAh battery pack (batteries not included).
- Модул Баи: Standard Nano module compartment compatible with RadioMaster Ranger Nano Module, RadioMaster RM 4in1 module, and TBS Crossfire Nano module.
- Антена: Rotatable antenna for optimized signal.
- Прилагођавање: Customizable base switches or 4-way joystick included.
- Контролни канали: 16 channels as standard, expandable to 32 channels (4in1 only, requires additional 4in1 RF module and compatible receivers).
- Приказ: 128x64 Monochrome LCD for clear information display.
- Сензори: Hall-effect wheel and trigger sensors for precise control.
3. Садржај пакета
- 1 x MT12 Surface Radio (4in1 Version)
- 1 x R85C Receiver
- 1 x Dual Switch Expansion module
- 1 x 4 Way Joystick Expansion module
- 1 x Nano Adapter
- 1 к УСБ-Ц кабл
- 1 x Leather Lanyard
- 1 x Custom RadioMaster signature carry case
- 1 x 18650 Battery Tray
- 1 к штитник за екран
- КСНУМКС к Налепнице
- 1 к приручник

This image displays the MT12 Surface Radio Controller along with its accessories, including the R85C receiver, dual switch and 4-way joystick expansion modules, Nano adapter, USB-C cable, leather lanyard, custom carry case, 18650 battery tray, screen protector, stickers, and the instruction manual.
4. Производ је готовview
4.1 Компоненте контролера

This diagram illustrates the various parts of the MT12 controller, including the LCD screen, speaker, buttons (SYS, PAGE<, RTN, Power, PAGE>, MDL, TELE, SD), P1/P2 dials, T1/T2/T3/T4/T5 switches, SA/SB/SC buttons, handwheel, hand grip, lanyard loop, TYPE-C charge port, SD button, external module bay, antenna, throttle trigger, USB port, AUX port, 3.5mm headphone jack, DSC trainer port, trigger position adjustment, and trigger spring adjustment.

Ова слика пружа јасан view of the front and left side of the MT12 controller, showcasing the screen, main control buttons, and the steering wheel.

This image highlights the right side of the MT12 controller, focusing on the steering wheel, throttle trigger, and accessible switches.

Позади view of the MT12 controller shows the battery compartment cover and the USB-C charging port at the base.

This close-up image details the throttle trigger mechanism, including the screws for adjusting its position and spring tension.

Ова слика пружа детаљан view of the MT12's monochrome LCD screen and the surrounding control buttons, which are used for menu navigation and settings adjustments.
4.2 Физичке димензије

The diagram shows the physical dimensions of the MT12 Surface Radio Controller: 177.8mm (height) x 118.4mm (width) x 207.8mm (depth).
5. Спецификације
5.1 MT12 Surface Radio
- Физичке димензије: 177.8 к 118.4 к 207.8 мм
- Тежина: 480 грама
- Радна фреквенција: 2.400 ГХз-2.480 ГХз
- Интерне РФ опције: 4-у-1 мулти-протокол / ЕЛРС 2.4 ГХз
- Подржани протоколи: Модуле депендент
- Оперативна струја: 160mA for 4in1 / 320mA for ELRS
- Оператионал Волtage: ДЦ КСНУМКС-КСНУМКСВ
- Оперативни систем: ЕдгеТКС
- Контролни канали: 16 standard, expandable to 32 (4in1 only)
- Приказ: 128x64 Monochrome LCD
- батерија: 2 x 18650 cells or a 2S 7.4V 5000mAh battery pack (not included)
- Пуњење: Built-in USB-C Charging
- Надоградња фирмвера: Преко УСБ-а или СД картице
- Wheel and Trigger Sensor: Халл-ефекат
- Модул Баи: Нано величина (РадиоМастер Рангер Нано модул / РадиоМастер РМ 4у1 модул / ТБС Цроссфире Нано модул)
5.2 R85C Receiver (Included with 4in1 version)
- Напајање: Једносмерна струја 4.5 - 8.4 V
- Фреквенцијски опсег: 2400-2483.5 МХз
- Протокол подршке: D8/D16/SFHSS
- Излазни канал: 5ЦХ ПВМ
- Тип антене: High-sensitivity 2.4G antenna
- Снага телеметрије: 100мВ / 20дБм
- Тежина: 5.7 грама
- Димензије: 31.0 к 18.5 к 13.0 мм
6. Подешавање
6.1 Инсталација батерије
The MT12 controller uses 2 x 18650 cells or a 2S 7.4V 5000mAh battery pack. Ensure correct polarity when inserting batteries into the provided tray or connecting a LiPo pack.
6.2 Повезивање пријемника
To establish communication between the MT12 controller and the R85C receiver, a binding process is required. Refer to the detailed steps in the included manual for your specific receiver type (R85C or ER3C-i).
For receivers with built-in gyro functionality, ensure the gyro is activated and configured correctly after binding. The sensitivity of the gyro can often be adjusted via a potentiometer on the receiver or through the controller's menu.
This video illustrates how to activate and configure the gyro function on a compatible receiver. It covers switching the receiver to gyro mode, checking the gyro phase, and adjusting sensitivity. While the video features a Radiolink receiver, the principles for gyro setup are generally applicable to the MT12's R85C or ER3C-i receivers.
7. Оперативни
7.1 Basic Controls and Adjustments
The MT12 controller features a standardized button layout for intuitive operation. The LCD screen provides real-time information and access to various settings. Use the navigation buttons and dials to adjust parameters such as steering trim, throttle trim, dual rates, and exponential curves.
This video showcases the features and menu system of a similar advanced RC transmitter. It highlights aspects like internal battery design, USB-C interface, trainer mode support, and customizable UI. While not the MT12, it offers insights into the capabilities and user experience of modern RC controllers.
This video provides a visual demonstration of the MT12 Surface Radio Controller, showcasing its design, button layout, and key features like the EdgeTX operating system, internal RF modules, Hall sensors, and customizable inputs. It offers a good visual reference for the controller's capabilities.
7.2 Advanced Settings (EdgeTX)
The EdgeTX firmware allows for advanced programming, including:
- Меморија модела: Store up to 30 different model configurations.
- Двоструке тарифе (D/R): Adjust the maximum travel of steering and throttle channels.
- Експоненцијално (EXP): Fine-tune the sensitivity around the center stick position for smoother control.
- ABS Braking: Program an Anti-lock Braking System to prevent wheel lock-up during hard braking, improving control.
- Channel Reversing: Reverse the direction of any channel to match your servo setup.
- End Points (EPA): Подесите максималне границе хода за сваки серво.
- Телеметрија: Запремина батерије монитораtage, signal strength (RSSI), and other data from compatible receivers.
This video offers an in-depth look at the features and menu system of the Flysky FS-G11P transmitter. It covers aspects like design, controls, battery installation, and menu navigation for various settings such as reversing channels, adjusting end points, and setting up ABS braking. While a different brand, the demonstrated functionalities are common in advanced RC controllers like the MT12.
8. Одржавање
- Чишћење: Regularly clean the controller with a soft, dry cloth. Avoid using harsh chemicals or solvents.
- Складиштење: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
- Ажурирања фирмвера: Periodically check the RADIOMASTER website for firmware updates to ensure optimal performance and access to new features. Updates can be performed via USB or SD card.
- Одржавање батерије: Follow proper charging and discharge procedures for your chosen battery type (18650 cells or LiPo pack) to maximize battery life and safety.
КСНУМКС. Решавање проблема
- Нема напајања: Check battery installation and charge level. Ensure the power switch is in the ON position.
- No Signal/Binding Issues: Re-perform the binding procedure. Ensure the receiver is powered on and within range. Check for interference.
- Неправилно кретање серво мотора: Verify channel reversing and end point settings in the EdgeTX menu. Check servo connections.
- Gyro Malfunction: Ensure the gyro is correctly enabled and its phase is set according to the car's movement. Adjust gyro sensitivity as needed.
- Контролер не реагује: Attempt a factory reset if persistent issues occur (refer to the full manual for factory reset procedures).
10. Гаранција и подршка
Please refer to the instruction manual before use for detailed warranty information and support contacts. For technical assistance or warranty claims, contact RADIOMASTER customer support or your authorized dealer.





