1. Важна безбедносна упутства
Always observe the following safety precautions when operating the Einhell TC-RH 1600 rotary hammer drill to prevent electric shock, injury, and fire. Keep these instructions for future reference.
Општа безбедност електричних алата
- Безбедност на радном месту: Одржавајте своје радно место чистим и добро осветљеним. Неред или тамна места изазивају несреће. Не користите електричне алате у експлозивним атмосферама, као што је присуство запаљивих течности, гасова или прашине.
- електрична безбедност: Утикачи електричних алата морају одговарати утичници. Никада не модификујте утикач на било који начин. Избегавајте контакт тела са уземљеним површинама као што су цеви, радијатори, шпорети и фрижидери.
- Лична безбедност: Always wear eye protection, hearing protection, and a dust mask. Dress properly; avoid loose clothing or jewelry. Secure long hair. Stay alert, watch what you are doing, and use common sense.
- Употреба и одржавање алата: Не форсирајте електрични алат. Користите одговарајући електрични алат за вашу примену. Искључите утикач из извора напајања пре него што извршите било каква подешавања, промените додатну опрему или одложите електрични алат.
Rotary Hammer Specific Safety
- Носите штитнике за уши when impact drilling. Exposure to noise can cause hearing loss.
- Use auxiliary handles supplied with the tool. Loss of control can result in personal injury.
- Држите електрични алат за изоловане површине за хватање када изводите операцију у којој прибор за сечење може да дође у контакт са скривеним ожичењем или сопственим каблом.
- Осигурајте радни предмет. Користите цлampили стегач за држање радног предмета. Ово је безбедније од коришћења руке и ослобађа обе руке за рад са алатом.
- Beware of dust. Drilling or chiseling concrete and masonry can create dust containing silica, which can cause respiratory diseases. Use dust extraction and wear a suitable dust mask.
2. Производ је готовview and Included Items
The Einhell TC-RH 1600 is a powerful rotary hammer drill designed for drilling, impact drilling, and chiseling in concrete, masonry, and other tough materials. It features an SDS-plus chuck for quick tool changes and a robust pneumatic impact mechanism.
Image 2.1: The Einhell TC-RH 1600 rotary hammer drill shown with its robust carrying case. The drill features a red and black housing with an auxiliary handle attached.
Укључене ставке:
- Еинхелл ТЦ-РХ 1600 Ротациона бушилица
- Аукилиари Хандле
- Заустављање дубине
- Торбица за ношење
- 7-piece SDS-plus Drill Bit Set (2x 6mm, 2x 8mm, 10mm, 12mm, 14mm)
Image 2.2: A 7-piece SDS-plus drill bit set, including various diameters for concrete and reinforced concrete applications. The bits feature carbide tips for durability.
3. Техничке спецификације
| Феатуре | Спецификација |
|---|---|
| Модел | ТЦ-РХ 1600 |
| Повер Инпут | 1600 В |
| Волtage | 240 В |
| Енергија удара | 4 Ј |
| Цхуцк Типе | СДС-плус |
| Функције | Drilling, Impact Drilling, Chiseling (with/without lock) |
| Сафети Феатуре | Overload safety clutch |
| Механизам удара | Пнеуматски |
| Контрола брзине | Electronic speed adjustment |
| Вибрација Дampинг | Вибратион-дamped main handle |
| Кућиште зупчаника | Робустан алуминијум |
4. Подешавање
4.1 Причвршћивање помоћне ручке
The auxiliary handle provides better control and safety during operation. Loosen the auxiliary handle by turning it counter-clockwise. Slide it over the chuck and position it to your desired angle. Tighten it securely by turning clockwise.
4.2 Inserting/Removing SDS-plus Tools
- Чишћење: Clean the shank of the SDS-plus tool and apply a thin layer of grease.
- Уметање: Push the tool into the SDS-plus chuck while rotating it slightly until it locks into place. Pull the tool to check if it is securely seated.
- Уклањање: Pull back the locking sleeve on the chuck and pull the tool out.
Напомена: The SDS-plus system allows for axial movement of the tool, which is normal and necessary for the impact mechanism.
4.3 Подешавање граничника дубине
Insert the depth stop into the designated hole on the auxiliary handle. Adjust the depth stop to the desired drilling depth by sliding it in or out. Secure it by tightening the auxiliary handle.
5. Упутство за употребу
5.1 Избор режима рада
The TC-RH 1600 offers four functions, selected via a rotary switch:
- бушење: For drilling in wood, metal, or plastic without impact.
- Impact Drilling: За бушење у бетону, зиду и камену са ударцем.
- Chiseling (with lock): For chiseling applications where the chisel position needs to be fixed.
- Chiseling (without lock): For chiseling applications allowing free rotation of the chisel for easier positioning.
Опрез: Always ensure the tool is unplugged before changing the operating mode.
5.2 Покретање и заустављање алата
- Почети: Притисните прекидач за укључивање/искључивање.
- Да се заустави: Release the ON/OFF switch. For continuous operation, press the ON/OFF switch and then the lock-on button. To release, press the ON/OFF switch again.
5.3 Контрола брзине
The tool features electronic speed control. The speed can be adjusted by varying the pressure on the ON/OFF switch. Lighter pressure results in lower speed, while full pressure provides maximum speed. This allows for fine adjustment during delicate work.
6. Одржавање и чишћење
Regular maintenance ensures the longevity and optimal performance of your Einhell TC-RH 1600 rotary hammer drill. Always unplug the tool from the power supply before performing any maintenance or cleaning.
6.1 Генерално чишћење
- Keep all safety devices, air vents, and the motor housing free of dirt and dust. Wipe the tool with a clean cloth.
- Do not use aggressive cleaning agents or solvents, as these can damage plastic parts.
- Clean the SDS-plus chuck regularly and apply a thin layer of grease to the moving parts to ensure smooth operation.
6.2 Преглед угљених четкица
The carbon brushes are subject to wear. If the motor sparks excessively or the tool stops working, the carbon brushes may need inspection or replacement. This should ideally be performed by a qualified technician.
6.3 Складиштење
Store the tool and its accessories in the provided carrying case in a dry, frost-free place, out of reach of children. Ensure the tool is clean before storage.
КСНУМКС. Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Алат се не покреће. | Нема напајања; неисправан прекидач; истрошене угљене четкице. | Check power connection; have switch or carbon brushes checked by a qualified technician. |
| Low impact power. | Incorrect operating mode; worn impact mechanism. | Ensure correct mode (impact drilling/chiseling) is selected; contact service for inspection. |
| Прекомерне вибрације. | Damaged accessory; internal fault. | Check accessory for damage and replace if necessary; contact service. |
| Алат се прегрева. | Overloading; blocked ventilation slots. | Reduce load; clean ventilation slots; allow tool to cool down. |
For problems not listed here or if solutions do not resolve the issue, please contact Einhell customer service or an authorized service center.
8. Гаранција и подршка
Einhell products are manufactured with care and undergo strict quality controls. This product is covered by a manufacturer's warranty in accordance with country-specific regulations. Please retain your proof of purchase for any warranty claims.
For technical support, spare parts, or warranty inquiries, please contact your local Einhell service center or visit the official Einhell webсајт за контакт информације.
Онлине ресурси: www.einhell.com
