OSRAM Door LED with Motion Sensor Instruction Manual

1. Увод

The OSRAM Door LED is a versatile, battery-operated luminaire designed for both indoor and outdoor use. It features an integrated light and motion sensor for automatic illumination, providing targeted downward lighting. Its robust, weather-resistant design and easy installation make it suitable for various applications.

Кључне карактеристике:

• Излаз светлости: 40 lm, 4000K cool white light, downward emission.
• Флексибилност: Cordless operation with 3 AA batteries (included).
• Трајност: High-quality polycarbonate housing with IP54 protection rating, resistant to weather and impact.
• Сензор: Integrated passive infrared (PIR) motion and light sensor for automatic activation in darkness upon motion detection.
• Инсталација: Easy and quick mounting with included accessories (screws or adhesive).

2. Безбедносне информације

Пажљиво прочитајте сва безбедносна упутства пре употребе производа. Сачувајте ово упутство за будуће потребе.

• This product is not a toy. Do not leave it unattended with children or allow children to use it.
• Not designed to replace conventional lighting in a private household.
• Упозорење о батерији: Keep batteries out of reach of children. Ingestion can lead to chemical burns, perforation of soft tissues, and death. Severe burns can occur within 2 hours of ingestion. Seek immediate medical attention.
• Ако се одељак за батерије (ако постоји) не затвара добро, престаните да користите производ и држите га подаље од деце.
• If you suspect batteries may have been swallowed or placed inside any part of the body, seek immediate medical attention.
• Избегавајте:
• Maximum ambient temperature exceeding +35 °C.
• Replacing a battery with an incorrect type that may defeat a safeguard (e.g., in the case of some lithium battery types).
• Operating at altitudes above 2000 m.
• Disposing of a battery into fire or a hot oven, or mechanically crushing or cutting a battery, which can result in an explosion.

3. Садржај пакета

Ensure all components are present before installation:

• 1x OSRAM Door LED Down Sensor 4000K White Luminaire
• 3к АА батерије
• Mounting accessories (screws, adhesive)

4. Спецификације

For detailed technical information, please refer to the official product page or contact OSRAM support.

5. Подешавање и инсталација

The OSRAM Door LED is designed for quick and flexible installation. It can be mounted using screws or adhesive.

5.1. Инсталација батерије

1. Locate the battery compartment on the back of the luminaire.
2. Отворите поклопац одељка за батерије.
3. Уметните 3 АА батерије, водећи рачуна о исправном поларитету (+/-).
4. Securely close the battery compartment cover. Ensure it clicks into place to maintain IP54 rating.

Figure 1: Technical diagram illustrating battery insertion and product dimensions.

5.2. Опције монтаже

Choose a mounting location that provides optimal coverage for the motion sensor and desired illumination area. Consider entrances, hallways, patios, or balconies.

Option A: Screw Mounting

1. Hold the luminaire against the desired mounting surface and mark the screw holes.
2. Drill pilot holes if necessary, suitable for the provided screws.
3. Secure the luminaire to the surface using the provided screws.

Option B: Adhesive Mounting

1. Clean the mounting surface thoroughly to ensure it is free of dust, grease, and moisture.
2. Apply the provided adhesive to the back of the luminaire.
3. Press the luminaire firmly against the desired surface for the recommended duration (refer to adhesive instructions if separate).

Figure 2: Product dimensions for mounting reference.

Слика 3: Прample of the Door LED installed above an entrance, providing downward illumination.

Figure 4: The Door LED installed on an outdoor ceiling, demonstrating its discreet profile.

Слика 5: Крупни план стране view of the Door LED on a wall, highlighting the integrated motion sensor.

6. Упутство за употребу

The OSRAM Door LED operates automatically using its integrated motion and light sensors.

• Аутоматско активирање: The luminaire will automatically turn on when motion is detected in its sensing range and the ambient light level is low (darkness).
• Опсег сензора: The passive infrared (PIR) sensor detects movement within its field of view. Ensure the sensor is not obstructed.
• Деактивација: The light will turn off automatically after a short delay once no motion is detected and sufficient ambient light is present, or after a preset duration if in darkness.

Figure 6: The Door LED providing illumination on a staircase upon detecting movement.

Figure 7: The Door LED used as a night light in a child's room, demonstrating its versatility.

7. Одржавање

7.1. Замена батерије

When the light output diminishes or the device stops responding, it is time to replace the batteries.

1. Отворите одељак за батерију као што је описано у одељку 5.1.
2. Уклоните старе батерије и одговорно их одложите у складу са локалним прописима.
3. Уметните 3 нове АА батерије, водећи рачуна о исправном поларитету.
4. Добро затворите поклопац одељка за батерије.

Напомена: Always use high-quality AA batteries for optimal performance and longevity.

7.2. Чишћење

To maintain the appearance and functionality of your luminaire:

• Обришите спољашњост меком, дamp тканина.
• Do not use abrasive cleaners or solvents, as these can damage the polycarbonate housing.
• Ensure the motion sensor lens is clean and free of obstructions for proper operation.

КСНУМКС. Решавање проблема

Ако проблем и даље постоји након покушаја ових решења, обратите се корисничкој подршци.

9. Гаранција и подршка

За информације о гаранцији и корисничку подршку, обратите се званичном OSRAM-у webсајту или контактирајте свог продавца.

Онлине ресурси:

• OSRAM Official Webсајт: ввв.осрам.цом
• LEDVANCE Product Page (Manufacturer): ledvance.com/docs/4099854531439

Када контактирате подршку, припремите број модела производа (4099854531439) и детаље о куповини.