1. Увод
The FNIRSI FPM-02 is a high-precision 3-in-1 environmental monitor designed for measuring illuminance (lux), temperature, and humidity. It features a 2-inch color display for clear data visualization and is suitable for various professional applications including office lighting assessment, horticulture, laboratories, and photography studios.
2. Шта је у кутији
- FNIRSI FPM-02 Environmental Monitor
- УСБ кабл
- Царри Цасе
- Упутство за употребу
3. Кључне карактеристике
- 3-у-1 мерење: Monitors Lux, temperature, and humidity simultaneously.
- 2-инчни екран у боји: High-definition display with light and dark theme modes for optimal readability.
- Real-time Data & Curve Recording: Visualizes environmental changes over time.
- Adjustable Alarm Thresholds: Alerts users when measurements exceed set values.
- Брзи Сampлинг рате: 20Hz (50ms) for real-time monitoring.
- Dual-language Interface: Supports English and Chinese.
- Built-in Sleep Mode & Data Logging: Enhances battery efficiency and usage tracking.
Figure 1: FNIRSI FPM-02 Environmental Monitor with key features highlighted on its color screen.
4. Подешавање
4.1 Пуњење уређаја
- Connect the provided USB cable to the FNIRSI FPM-02's charging port.
- Укључите други крај USB кабла у стандардни USB адаптер за напајање (није укључен) или USB порт рачунара.
- Уређај ће приказати статус пуњења на екрану. Потпуно пуњење обично траје отприлике 2-3 сата.
4.2 Укључивање/искључивање
- To power on: Press and hold the Power button (usually located on the side or front panel) until the screen illuminates.
- To power off: Press and hold the Power button until the device shuts down.
5. Упутство за употребу
5.1 Навигација кроз интерфејс
The FPM-02 features a user-friendly interface with a 2-inch HD color screen. Use the navigation buttons (up, down, left, right, OK/Enter) to move through menus and select options. The device supports both English and Chinese languages, which can be selected in the settings menu.
5.2 Taking Measurements (Illuminance, Temperature, Humidity)
Upon powering on, the device typically defaults to the main measurement screen, displaying real-time values for illuminance (Lux/FC), temperature (°C/°F), and relative humidity (%).
- Осветљење: Ensure the light sensor (located at the top of the device) is unobstructed and pointed towards the light source or area to be measured. The device will display the light intensity in LUX or FC.
- Температура и влажност: The internal sensors continuously monitor ambient temperature and humidity. Allow a few minutes for readings to stabilize after significant environmental changes.
5.3 Real-time Data and Curve Recording
The device can display real-time data and record changes over time, presenting them as a curve. Access this feature through the main menu to visualize trends and fluctuations in environmental conditions.
5.4 Подешавање прагова аларма
You can set custom alarm thresholds for Lux, temperature, and humidity. If a measured value exceeds or falls below the set threshold, the device will trigger an alert. Refer to the device's settings menu to configure these thresholds.
5.5 Sleep Mode and Data Logging
To conserve battery, the device features a configurable sleep mode. It also includes data logging capabilities, allowing you to store measurement data for later review and analysis. Consult the user manual for detailed instructions on activating and managing these functions.
6. Одржавање
- Чишћење: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents. Ensure the light sensor and display are kept clean for accurate readings.
- Складиштење: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, ensure the battery is partially charged (around 50%) to prolong its lifespan.
- Одржавање батерије: Avoid fully discharging the lithium battery frequently. Recharge the device when the battery level is low.
КСНУМКС. Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Уређај се не укључује. | Слаба или испражњена батерија. | Напуните уређај помоћу приложеног УСБ кабла. |
| Нетачна очитавања. | Sensor obstructed or dirty; device not calibrated. | Clean sensors. Ensure proper placement. If issues persist, contact support. |
| Екран не реагује. | Софтверски квар; екстремна температура. | Restart the device. Ensure operating within specified temperature range. |
8. Техничке спецификације
| Параметар | Валуе |
|---|---|
| Број модела | ФПМ-02 |
| Опсег осветљености | 0–1000 / 9999 / 99990 LUX; 10–1000 / 1000 / 10000 FC |
| Резолуција осветљења | 0.1 LUX (0–1000); 0.1 FC (10–1000) |
| Прецизност осветљења | ±(3% + 5 LUX) with standard incandescent lamp (2854°K); ±(6% + 5 LUX) for other light sources |
| Sampлинг Тиме | 20Hz (50ms) |
| Дисплаи | 2″ HD Color Screen |
| Извор напајања | 3.7V / 1500mAh Lithium Battery |
| Димензије уређаја | 63 × 28 × 182 мм |
| Тежина | 205г |
| Боја | Црно и плаво |
| Земља порекла | Кина |
9. Гаранција и подршка
This FNIRSI FPM-02 Environmental Monitor comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact the retailer or manufacturer directly. Keep your purchase receipt as proof of purchase.