F03-0329-0AA1 AtomStack Swift кориснички приручник

AtomStack F03-0329-0AA1 Swift

Спецификације

• Назив производа: AtomStack Swift
• Број модела: Ф03-0329-0АА1
• верзија: B
• Улазна снага: ДЦ 24В
• Портови: Type-C Port (For PC Connection), Expansion Port (for Chuck, Roller, and Other Accessories)
• Индикатор статуса: Solid blue when working

Упутства за употребу производа

Листа делова:

• Склоп Кс-осе
• Склоп леве Y осе (са мотором)
• Склоп десне Y осе
• Адаптер за напајање
• Llave fija (Fixed wrench)

Getting to Know AtomStack Swift:
Familiarise yourself with the different assemblies and parts of the AtomStack Swift, including the X-axis assembly, left and right Y-axis assemblies, power adapter, and optical shaft.

How to Install Swift:

1. Place the five assemblies as shown in the diagram. Ensure the X-axis assembly belt faces downward, and the Y-axis assembly with the motor is on the left.
2. Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley. Ensure it is fully inserted and aligned parallel with the front X-axis assembly.
3. If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.

Листа делова

Getting to Know AtomStack Swift

How to install Swift

1. Place the five assemblies as shown in the diagram.
   Напомена: The X-axis assembly should have the belt facing downward, and the Y-axis assembly with the motor should be on the left.
2. Align and connect the five assemblies, then secure them using six M5×8 screws.
3. Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley.
   (Ensure it is fully inserted and aligned parallel with the front X-axis assembly)
4. Install the laser module and tighten the thumb knob.Напомена:
   If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.
5. Connect the motor cable, limit switch cables, and laser cable as shown in the diagram to complete the installation.

Метод фокусирања:
Place the workpiece. Turn the focusing knob downward and loosen the thumb screw. Let the laser module drop until the knob touches the material. Tighten the screw to fix the module, then return the knob to its original position.

Савет:
When placing the material, use the X/Y axis scale lines for alignment. When using “Absolute Coords” mode in the software, the design will align with the material’s position.

• If the engraving quality deteriorates after prolonged use, adjust the eccentric nuts with the open-end wrench to improve it.
• Use the open-end wrench to adjust the eccentric nuts on the left and right Y-axes.
• Adjust them so that when the machine is tilted at a 45° angle, as shown, the X-axis slides down slowly and evenly.

ATOMSTACK Official Recommended Software

Mobile App Download Method：

Метод преузимања рачунарског софтвера:
Линк за преузимање AtomStack Studio-а: https://atomstack.com/pages/atomstack-studio-software

1. Official Download Link
   https://atomstack.com/pages/atomstack-studio-software
2. Скенирајте за преузимање

Софтверски ресурси

ЛигхтБурн
Unofficial software. Requires a separate purchase

Метод преузимања софтвера Lightburn: Линк за преузимање: https://lightburnsoftware.com/pages/download-trial

1. Scan to download the configuration file “AtomStack_Swift_Vxxx.lbdev”
2. Отворите софтвер LightBurn, изаберите: Уређаји – Увоз
3. Select “AtomStack_Swift_Vxxx.lbdev”, click “Open”, then “OK”. In the bottom right corner, select “AtomStack Swift”.
   The machine will beep once to confirm the connection.

Напомена: If adding the device manually, set the “Baud Rate” in “Device Settings” to 460800

Упутство за употребу

Контактирајте нас

Scan the QR code for more information:

• Unboxing & First Use
• Use with the AtomStack APP
• Решавање проблема
• Одржавање

Служба за кориснике:

• For the detailed warranty policy, please visit our official webсајт: ввв.атомстацк.цом
• За техничку подршку и услугу, пошаљите е-пошту: суппорт@атомстацк.цом

Произвођач:
Схензхен АтомСтацк Тецхнологиес Цо., Лтд.

Поштански број: 518172

Адреса:
17. спрат, зграда 3А, фаза ИИ, Интелигентни парк, бр. 76, авенија Баохе, улица Баолонг, округ Лонгганг, Шенжен, Гуангдонг, Кина.

Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC60825-1 E, 3., as described in Laser Notice No.56, dated May 8, 2019.

ФАК