BinTec CAPI Software System
Готовоview
CAPI 1.1 and CAPI 2.0 info values with their appropriate error-codes associated with the capiInfoNumber field are as follows. Both CAPI 1.1 and 2.0 info values are arranged by error class.
CAPI 1.1 Info Values
Error Class 10
Formal error messages and errors during management of Message Queues.
| 0к1001 | Application registration error |
| 0к1002 | Wrong application id |
| 0к1003 | Message error |
| 0к1004 | Wrong capi command |
| 0к1005 | Message queue full |
| 0к1006 | Message queue empty |
| 0к1007 | Messages lost |
| 0к1008 | Error during deinstallation |
Error Class 20
Addressing errors.
| 0к2001 | Wrong controller |
| 0к2002 | Wrong PLCI |
| 0к2003 | Wrong NCCI |
| 0к2004 | Погрешан тип |
Error Class 31
Incorrect parameters.
| 0к3101 | B-channel incorrectly coded |
| 0к3102 | Info mask incorrectly coded |
| 0к3103 | Service SI mask incorrectly coded |
| 0к3104 | Service EAZ mask incorrectly coded |
| 0к3105 | B2 protocol incorrect |
| 0к3106 | Dlpd incorrect |
| 0к3107 | B3 protocol incorrect |
| 0к3108 | NCPD incorrect |
| 0к3109 | NCPI incorrect |
| 0к310а | Flags incorrectly coded |
Error Class 32
Unsupported parameters.
| 0к3201 | Грешка контролера |
| 0к3202 | Conflict between registrations |
| 0к3203 | Function is not supported |
| 0к3204 | PLCI not active |
| 0к3205 | NCCI not active |
| 0к3206 | B2 protocol not supported |
| 0к3207 | Change of B2 protocol not possible in this state |
| 0к3208 | B3 protocol not supported |
| 0к3209 | Change of B3 protocol not possible in this state |
| 0к320а | Parameters used not supported in DLPD |
| 0к320б | Parameters used not supported in NCPD |
| 0к320ц | Parameters used not supported in NCPI |
| 0к320д | Data length not supported |
| 0к320е | DTMF number unknown |
Error Class 33
Network errors.
| 0к3301 | Error on setup of D-channel layer 1 |
| 0к3302 | Error on setup of D-channel layer 2 |
| 0к3303 | Error on setup of B-channel layer 1 |
| 0к3304 | Error on setup of B-channel layer 2 |
| 0к3305 | Abort D-channel layer 1 |
| 0к3306 | Abort D-channel layer 2 |
| 0к3307 | Abort D-channel layer 3 |
| 0к3308 | Abort B-channel layer 1 |
| 0к3309 | Abort B-channel layer 2 |
| 0к330а | Abort B-channel layer 3 |
| 0к330б | Re-establish B-channel layer 2 |
| 0к330ц | Re-establish B-channel layer 3 |
Error Class 34
Network messages (whereby xx refers to the related 1TR6 Error-Cause).
| 0к3400 | Normal call clearing |
| 0к3480 | Normal call clearing |
| 0к3481 | Invalid call reference value |
| 0к3483 | Bearer service not implemented |
| 0к3487 | Call identity does not exist |
| 0к3488 | Call identity in use |
| 0к348а | No channel available |
| 0к3490 | Requested facility not implemented |
| 0к3491 | Requested facility not subscribed |
| 0к34а0 | Outgoing calls barred |
| 0к34а1 | Корисник је заузет |
| 0к34а2 | Negative GBG Comparison |
| 0к34а5 | As SPV not aloud |
| 0к34б0 | Reverse charging not allowed at origination |
| 0к34б1 | Reverse charging not allowed at destination |
| 0к34б2 | Reverse charging rejected |
| 0к34б5 | Destination not obtainable |
| 0к34б8 | Number changed |
| 0к34б9 | Неисправно |
| 0x34ba | User not responding |
| 0x34bb | User access busy |
| 0x34bd | Incoming calls barred |
| 0x34be | Позив је одбијен |
| 0к34д9 | Загушење мреже |
| 0x34da | Remote user initiated |
| 0к34ф0 | Local procedure error |
| 0к34ф1 | Remote procedure error |
| 0к34ф2 | Remote user suspended |
| 0к34ф3 | Remote user resumed |
| 0к34фф | User info discarded locally |
Error Class 40
FAX-G3 Errors.
| 0к4001 | Remote station is not a fax G3 machine |
| 0к4002 | Local fax module busy |
| 0к4003 | Disconnected during transfer (remote abort) |
| 0к4004 | Disconnected before transfer (training error) |
| 0к4005 | Disconnected during transfer (local tx data underrun) |
| 0к4006 | Fax module temporary disabled |
| 0к4007 | Local disconnect (local abort) |
| 0к4008 | Disconnect during transfer (remote procedure error) |
| 0к4009 | Remote disconnect (remote abort) |
| 0к400а | Line Disconnect during transfer |
| 0к400б | Disconnect before transfer |
| 0к400ц | Local Disconnect (SFF coding error) |
CAPI 2.0 Info Values
Error Class 00
Informative values (corresponding message was processed).
| 0к0001 | NCPI not supported by current protocol, NCPI ignored |
| 0к0002 | Flags not supported by current protocol, flags ignored |
| 0к0003 | Alert already sent by another application |
Error Class 10
Error information concerning CAPI_REGISTER.
| 0к1001 | Превише апликација |
| 0к1002 | Logical block size too small, must be at least 128 bytes |
| 0к1003 | Buffer exceeds 64 kByte |
| 0к1004 | Message buffer size too small, must be at least 1024 byte |
| 0к1005 | Max. number of logical connections not supported |
| 0к1006 | Резервисано |
| 0к1007 | The message could not be accepted because of an internal busy condition |
| 0к1008 | OS Resource error (e.g. no memory) |
| 0к1009 | COMMON-ISDN-API not installed |
| 0к100а | Controller does not support external equipment |
| 0к100б | Controller does only support external equipment |
Error Class 11
Error information concerning message exchange functions.
| 0к1101 | Illegal application number |
| 0к1102 | Illegal command or subcommand or message length less than 12 octets |
| 0к1103 | The message could not be accepted because of a queue full condition |
| 0к1104 | Queue is empty |
| 0к1105 | Queue overflow, a message was lost |
| 0к1106 | Unknown notification parameter |
| 0к1107 | The message could not be accepted because of an internal busy condition |
| 0к1108 | OS resource error (e.g. no memory) |
| 0к1109 | COMMON-ISDN-API not installed |
| 0к110а | Controller does not support external equipment |
| 0к110б | Controller does only support external equipment |
Error Class 20
Error information concerning resource/coding problems.
| 0к2001 | Message not supported in current state |
| 0к2002 | Illegal Controller/PLCI/NCCI |
| 0к2003 | Out of PLCI |
| 0к2004 | Out of NCCI |
| 0к2005 | Out of LISTEN |
| 0к2006 | Out of FAX resources (protocol T.30) |
| 0к2007 | Illegal Message parameter coding |
Error Class 30
Error information concerning requested services.
| 0к3001 | B1 protocol not supported |
| 0к3002 | B2 protocol not supported |
| 0к3003 | B3 protocol not supported |
| 0к3004 | B1 protocol parameter not supported |
| 0к3005 | B2 protocol parameter not supported |
| 0к3006 | B3 protocol parameter not supported |
| 0к3007 | B protocol combination not supported |
| 0к3008 | NCPI not supported |
| 0к3009 | CIP Value unknown |
| 0к300а | Flags not supported (reserved bits) |
| 0к300б | Facility not supported |
| 0к300ц | Data length not supported by correct protocol |
| 0к300д | Reset procedure not supported by current protocol |
Error Class 33
Protocol error reasons.
- 0x3301 Protocol error layer 1 (broken line or B-channel removed by signaling protocol)
- 0x3302 Protocol error layer 2
- 0x3303 Protocol error layer 3
- 0x3304 Another application got that call
- 0x3311 Connecting not successful (remote station is no FAX G3 machine)
- 0x3312 Connecting not successful (training error)
- 0x3313 Disconnected before transfer (remote station does not support transfer mode, e.g. resolution)
- 0x3314 Disconnected during transfer (remote abort)
- 0x3315 Disconnected during transfer (remote procedure error, e.g. unsuccessful repetition of T.30 commands)
- 0x3316 Disconnected during transfer (local tx data underrun)
- 0x3317 Disconnected during transfer (local rx data overflow)
- 0x3318 Disconnected during transfer (local abort)
- 0x3319 Illegal parameter coding (e.g. SFF coding error)
Error Class 34
Disconnect cause from the network according to ETS 300102-1/Q.931. In the field ‘xx’ the cause value received within a cause information element (octet 4) from the network is indicated.
- 0x3481 Unallocated (unassigned) number
- 0x3482 No route to specified transit network
- 0x3483 No route to destination
- 0x3486 Channel unacceptable
- 0x3487 Call awarded and being delivered in an established channel
- 0x3490 Normal call clearing
- 0x3491 User busy
- 0x3492 No user responding
- 0x3493 No answer from user (user alerted)
- 0x3495 Call rejected
- 0x3496 Number changed
- 0x349a Non-selected user clearing
- 0x349b Destination out of order
- 0x349c Invalid number format
- 0x349d Facility rejected
- 0x349e Response to STATUS ENQUIRY
- 0x349f Normal, unspecified
- 0x34a2 No circuit / channel available
- 0x34a6 Network out of order
- 0x34a9 Temporary failure
- 0x34aa Switching equipment congestion
- 0x34ab Access information discarded
- 0x34ac Requested circuit / channel not available
- 0x34af Resources unavailable, unspecified
- 0x34b1 Quality of service unavailable
- 0x34b2 Requested facility not subscribed
- 0x34b9 Bearer capability not authorized
- 0x34ba Bearer capability not presently available
- 0x34bf Service or option not available, unspecified
- 0x34c1 Bearer capability not implemented
- 0x34c2 Channel type not implemented
- 0x34c5 Requested facility not implemented
- 0x34c6 Only restricted digital information bearer capability is available
- 0x34cf Service or option not implemented, unspecified
- 0x34d1 Invalid call reference value
- 0x34d2 Identified channel does not exist
- 0x34d3 A suspended call exists, but this call identity does not
- 0x34d4 Call identity in use
- 0x34d5 No call suspended
- 0x34d6 Call having the requested call identity has been cleared
- 0x34d8 Incompatible destination
- 0x34db Invalid transit network selection
- 0x34df Invalid message, unspecified
- 0x34e0 Mandatory information element is missing
- 0x34e1 Message type non-existent or not implemented
- 0x34e2 Message not compatible with call state or message type non-existent or not implemented
- 0x34e3 Information element non-existent or not implemented
- 0x34e4 Invalid information element contents
- 0x34e5 Message not compatible with call state
- 0x34e6 Recovery on timer expiry
- 0x34ef Protocol error, unspecified
- 0x34ff Interworking, unspecified
Документи / Ресурси
 | CAPI Software System |
Референце
- Упутство за употребуmanual.tools
Published: June 9, 2026
Ажурирано: 11. јуна 2026