Pivot Cycles designs and manufactures premium, high-performance mountain bikes, carbon frames, and electric bicycles engineered for optimal trail riding.
Pivot Cycles is a premier bicycle manufacturer renowned for its relentless innovation, high-performance carbon frames, and exceptional mountain bikes. With roots in high-precision machining, Pivot has grown to deliver industry-leading bicycles with patented designs and advanced trail-riding technologies.
The brand offers a wide range of standard and electric mountain bikes, including the Shuttle AMP'd, Shuttle LT, and Mach 6 Enduro models. These bikes incorporate advanced kinematics like the renowned dw-link suspension design, seamlessly integrated drive systems (such as Bosch and Shimano STEPS), and top-tier FOX or RockShox components.
Whether you are dialing in the perfect suspension sag, maintaining an e-bike battery, or setting up tire pressures, Pivot Cycles ensures riders have total control on the trails. Below is a comprehensive directory of user manuals, suspension setup guides, and operational instructions for Pivot Cycles bikes and components.
Најновији приручници од manuals+ курирано за овај бренд.
Честа питања о упутствима, регистрацији и подршци за овај бренд.
Always set sag with the compression lever in the open position. While standing on the pedals, sit hard into the saddle to cycle the suspension. While in the saddle, slide the O-ring against the air can. Step off gently, and adjust the air pressure until the O-ring aligns exactly with the red line on the Pivot sag indicator.
As a general starting point, Pivot recommends approximately 23 psi for the front tire and 28 psi for the rear tire to maintain optimal traction and avoid pinch flats. Check your specific model manual to confirm ideal pressures based on your rider weight.
Locate the rubber charging port on the frame (usually on the non-drive side). Pull back the sealing cover, align the charging cable with the terminal, and insert it. The charger's LED will illuminate green when the battery is completely charged.
Ensure the assist mode is on, then depending on your controls (Bosch or Shimano), press and hold the lower '-' button on the remote to initiate Walk Mode. This will provide limited power to help you push the bike up steep terrain.