STM32 is a leading family of 32-bit microcontrollers by STMicroelectronics based on the Arm Cortex-M processor, widely used in embedded systems and IoT devices.
СТМКСНУМКС is a comprehensive family of 32-bit microcontroller integrated circuits produced by STMicroelectronics. Built around the Arm Cortex-M processor architecture, STM32 microcontrollers offer a vast portfolio ranging from high-performance to ultra-low-power series.
These MCUs are a standard in the electronics industry, powering everything from consumer gadgets to industrial equipment. The brand is also highly popular among hobbyists and developers for its accessible evaluation boards, such as the Nucleo, Discovery, and the widely used "Blue Pill" (STM32F103C8T6) development boards.
Најновији приручници од manuals+ курирано за овај бренд.
Честа питања о упутствима, регистрацији и подршци за овај бренд.
To program the STM32F103C8T6 (Blue Pill) in Arduino IDE, go to Tools > Board > Board Manager, search for 'STM32F1', and install the package. You will need an FTDI USB-to-Serial converter to upload the code.
The STM32F103C8T6 operates on 3.3V logic levels, but most of its GPIO pins are 5V tolerant, allowing it to interface with 5V sensors and displays.
Move the state jumper on the board to position 1 and press the reset button. After uploading your code, move the jumper back to position 0 to run the program.