coolo Zigbee Smart Light Sensor User Manual

Coolo Zigbee Smart Light Sensor

Мрежна конфигурација

1. Укључите производ
   • Align the opener to the slot
   • Окрените поклопац батерије у смеру супротном од казаљке на сату да бисте га отворили
   • Remove the battery insulation film to power
2. Притисните дугме RESET 3 секунде и отпустите, црвена ЛЕД диода ће трептати за конфигурацију мреже.

Упутство за инсталацију

Положај уградње
Remove the protective film from the adhesive on the base. Stick the device where needed as shown in the following figure.

Пажљиво прочитајте упутство и правилно користите производ
Хвала вам на куповиниasing and using this product. Before using the product, please read the manual carefully and use the product correctly. In order to avoid damage to the equipment, such as all consequences caused by abnormal operation, the company will not bear any responsibility. The pictures in this manual are used to guide the user’s operation and are for reference only. Please refer to the actual product for details.

Опис производа

Савети:
This product must be connected to the Zigbee gateway to function properly and upload data to the server/APP

Параметри производа

• Product Name Zigbee Ambient Light Sensor
• Вирелесс Протоцол Зигбее 3.0
• Detection Range 0~157K Lux
• Battery TypeCR2450
• Standby Current<10uA
• Working Temperature -10 ~ 55 C
• Working Humidity 0% ~ 95%RH
• Product Size Ф 33×16mm