INTERRA iX7 Touch Panel Instruction Manual

INTERRA iX7 Touch Panel

Спецификације

• Шифра производа: ITR165-X0X4
• Напајање: 12-30 VDC or PoE+
• Номинална потрошња струје: 350 mA @12 VDC
• Макс. струјна потрошња: 640 mA @12 VDC
• Communication Current (from KNX Bus): 5 мА
• Номинална потрошња енергије: 4.2 В @ 12 ВДЦ
• Макс. Потрошња струје: 7.7 В @ 12 ВДЦ
• ЦПУ: Четворојезгрени АРМ Цортек-А53
• Меморија: 2 ГБ ДДР3
• Складиштење: 8 ГБ ЕММЦ
• ОС: Interra Operation System based on AOSP 7.1
• Врста заштите: ИП 20
• УСБ: КСНУМКС к УСБКСНУМКС
• КНКС: 1 x KNX Connector
• Периферни уређаји: Temp/Hum Sensor, MEMS Microphone
• Дугме: Дугме за ресетовање
• Мрежа: КСНУМКСМбпс Етхернет
• РТЦ: Real Time Clock up to 5 days
• ГПИО: 6 Digital Dry Contact Inputs (the Sixth input supports Digital/Analog Mode), 6 Relay Outputs
• Температурни опсег:
  • Рад: 0°Ц до 45°Ц
  • Складиштење: -15 ° Ц до 70 ° Ц
• Димензије:
  • Panel: 125 x 210 x 54.15 mm (W x H x D)
  • Mounting Box: 116 x 201 x 65 mm (W x H x D)
• Конфигурација: With Interra Configurator Software

ОПИС

Interra iX7 touch panel is designed to control the entire automation system from a single smart point. Interra İX7 can control complex systems such as switches, simple sensors, lighting, camera systems, and alarm systems from a central point. Moreover, iX7 can also control the air conditioning systems with 2 2-point mode by thermostat functionality. Mobile control can be done by downloading InterraX software from online software markets related to IOS or Android-based devices. Also, the configuration software (Interra Configurator) can be downloaded from our webсајт (www.interratechnology.com) for the iX7 touch panel configuration.

MODELS AND VARIATIONS

MAIN FUNCTIONAL CHARACTERISTICS

• Automation Control: Control EIO (IO Module controlled over ethernet) and KNX automation systems with the Interra Touch Panel.
• Функција тајмера: Schedule operations daily, weekly, monthly, or annually using the panel s timer.
• Контрола безбедности: Manage security systems and view cameras via the panel and mobile apps.

ВЕЗЕ

Волtage: The panel is powered with 12 12-30 VDC via 2 2-pos red coloured connectors. The connector label shows the correct polarity for cable connections.
КНКС: The panel has a blue 2 2-pos connector for the KNX port. The connector label shows the correct polarity for cable connections.
УСБ: The iX7 features two USB host connectors on the side panel for storage expansion.
Етхернет: The panel includes a standard 10/100Mbps RJ45 Ethernet connector.
У/И: The panel has 6 digital dry contact inputs and 6 relay outputs, Input 6 (the sixth input) input)” can operate in digital or analog mode. A temperature sensor can be connected to input 6. Output relay contacts capable of driving 250VAC 5A resistive loads.

Напомена: Input 6 operates in analog or digital mode on products that support analog functionality.

ДИМЕНЗИЈЕ

понtage Box:

Уређај

ОПШТЕ КАРАКТЕРИСТИКЕ

МОУНТИНГ

1. First, the mounting box must be attached to a suitable place on the wall. The long side of the mounting box should be placed at a right angle to the ground.
2. Then, iX7 is attached to the mounting box as shown in the left figure, and the mounting process is completed.

БЕЗБЕДНОСНА УПУТСТВА

• Уређај сме инсталирати и пустити у рад само квалификовани електричар или овлашћено лице.
• For planning and construction of electrical installations, the appropriate specifications, guidelines, and regulations in force in the respective country must be followed.
• Не повезујте главну волtage (230 VAC) or any other external voltages to any point of the KNX bus.
• Повезивање екстерног волtage might put the KNX system at risk. Please do not overlook this issue.
• Ensure there is sufficient insulation between the 230 VAC voltage cables and the KNX bus.
• The maximum screwing torque value should be 1.2 Nm during the mounting process of the mount case and touch panel.
• Do not use aerosol sprays, solvents, or abrasives that might damage the device.
• Мора бити обезбеђена приступачност уређаја за рад и визуелни преглед.