MULTIBRACKETS 5605 Wall Bracket

Спецификација

• производ: MULTIBRACKETS 5605 Universal Wall Bracket / Long Reach Arm Mount
• Тип: Full-motion articulating TV wall mount (dual arm long-reach swivel)
• Боја: Црна метална завршна обрада
• Материјал: Heavy-duty solid steel construction
• Screen Compatibility: Fits most flat-panel TVs 65″ – 110″ diagonal
• Max screen diagonal: ~279 cm (110″)
• Капацитет тежине: Up to 125 kg (~275 lbs) load support
• ВЕСА подршка: Compatible with most VESA patterns from 100×100 mm up to 800×600 mm
• Movement & Adjustment: Full-motion swivel, tilt, and rotate at multiple pivot points
• Опсег нагиба: approx. -5° to +10°
• Swivel/rotation: approximately 60° to +60°
• Extension from wall: up to 980 mm (~38.6″)
• Карактеристике:
  • Dual long-reach arms for flexible viewинг позиције
  • Smart cable management system to hide cables
  • Partially pre-assembled with a full hardware kit included
• Тип инсталације: Wall mount, articulating bracket
• Боја: Црно

ВАЖНО!
Your Plasma. LCD. TV, Projector, Projector Screen, or other HiFi equipment represents a considerable value.
If screws are Included they may not be suitable for the material of your wall, ceiling, or floor. Replace the screws with suitable ones if needed.
In case you are unsure regarding any aspects or the mounting of this product,t please
Консултујте се са стручњаком.

Упозорење!
Увек проверити тхе дубина of тхе рупе пре почевши an инсталација.

Fits most 65″-110″ flat panel TV

• Weight capacity: 125kg/275 lbs
• VESA compliance: 100×100 200×200 300×300 400×200 400×400 600×400 800×600

УПОЗОРЕЊЕ 
Тешке телесне повреде и материјална штета могу бити последица неправилне инсталације или састављања. Пажљиво прочитајте следеће упозорење пре почетка.

• Производе морају инсталирати професионалци.
• Ако не разумете упутства или имате било какве недоумице или питања, контактирајте квалификованог локалног инсталатера.
• Немојте инсталирати или састављати ако су производ или хардвер оштећени или недостају. Ако су вам потребни резервни делови, обратите се локалном дистрибутеру за помоћ.
• This product fits most65″-11D”LCD and plasma screens; maximum weight of LCD /plasma screen: 125kg.
• This product has been designed for use on masonry (solid concrete, 2000 PSI density minimum).
• For safe installation. The wall you are mounting to must support a minimum of 3 times the weight of the total load (the mount, the TV, and all accessories).
• Немојте користити овај производ за било коју другу примену осим првобитно дизајнираног.
• This product contains moving parts; please use it with caution.
• When installing a flat panel display, please do not damage the electrical wiring or the power source.
• Произвођач неће сносити никакву одговорност за монтажу на вертикални зид, нити за случајну или последичну штету која може настати.
• Произвођач се одриче било какве одговорности за модификације, неправилну инсталацију или уградњу преко специфицираног распона тежине.
• The manufacturer will not be liable for any damages arising out of the use of, or inabilityto use, the product.

Прошла листа

ИНСТАЛАЦИЈА

INSTALLATION OPTION 1: Wood Stud Installation (Suitable for 16″ or 24″ apart studs)

1. Use a stud finder to locate the drywall studs and mark the desired installation locations with a pencil.
2. Причврстите шаблон зидне плоче (ББ) на зид на жељеној локацији за постављање.
3. Ensure the Wall Plate Template (BB) horizontal alignment is verified with a bubble level, and mark 6 lag bolt installation locations on the stencil and the wall. Attempt to locate the lag bolt locations in the middle of the studs.
4. Use a 7/32″ (5.5mm) drill bit to drill a pilot hole in the wall with a depth of at least 2.6″ (65mm).

Please note that failure to drill pilot holes may result in the lag bolt heads snapping during installation.

Secure the Wall Plate to the wall with 6 x Lag Bolts ( H) and 6 x Washers (H).

НАПОМЕНА: Do not use Wall Anchor (I) for wood stud installation.

ОПЦИЈА ИНСТАЛАЦИЈЕ 2: Уградња бетонског/цигленог зида

1. Причврстите шаблон зидне плоче (ББ) на зид на жељеној локацији за постављање.
2. Ensure the Wall Plate Template (BB) horizontal alignment is verified with a bubble level, and mark 6 lag bolt installation locations on the stencil and the wall.
3. Use a 3/8″ (10 mm) drill bit to drill a pilot hole in the wall with a depth of at least 2.6″ (65mm). Please note that failure to drill pilot holes may result in the lag bolt heads snapping during installation.

Уметните 6 к зидних анкера (И) у рупе. Причврстите зидну плочу за зид помоћу 6 к завртња (Х) и 6 к подлошки (Х).

This full motion TV wall mount comes with a sliding mechanism that allows the arms and the TV to slide horizontally left or right for up to 15. 7 inches, while the wall plate is stationary on the wall. This feature allows the TV to be placed at an optimal position, regardless of the position of the wall studs. The mount will ship with the locking bars installed in place at their center position. If the sliding function will be used, take off the locking plates by removing the bolts that hold them in place.

Place the top locking bar at the desired position to fix the left slide limit of the arms, and place the bottom bar at the desired position to fix the right side limit of the arms. The raised metal piece at the end of the locking bars limits the slide of the arms. Ensure the locking bars are oriented correctly to ensure both the left and right side locking bars correctly limit the slide. Ensure both of the bolts are tightened at each locking bar’s position to prevent the arms from sliding off the wall plate.

УПОЗОРЕЊЕ: FAILURE TO INSTALL THE LOCKING BARS ADEQUATELY MAY RESULT IN THE ARMS AND THE TV FROM SLIDING OFF THE WALL PLATE.

Attaching the TV to the Mount (For Displays With Smaller Bolt Hole Patterns)
For TVs with smaller bolt hole patterns of VESA 100×100, 100×200, 200×100, and 200x200mm, the TV can be mounted directly on the plate, without the extension bars.

Причвршћивање ТВ-а на носач (за екране са већим шаблонима рупа за вијке) За телевизоре са већим шаблоном рупа за вијке од ВЕСА 300×300,400×200,400×400,600×400, 800×600 мм, користите носаче телевизора и продужне шипке да бисте инсталирали ТВ на носач.

Attach the 2 x TV Brackets to the back of the TV by using screws A+E, B+E, C+E, or Dor G.

НАПОМЕНА: The hardware packet provided fits most TVs in the market. If your TV requires different hardware, please contact us at моунт-ит.цом to procure additional hardware kits.

Ensure the screws are adequately engaged with the screw holes on the TV.
Do not overtighten the screws. Ensure the TV brackets sit flat with the back of the T.V.

Hangina g TV On The Wall Mount Arms

Lift the TV (two persons recommended) and hang the TV brackets onto the wall mount extension bars.

Осигуравање телевизора на носачу

Secure the TV brackets on the mount by attaching the 4 x AA Safety Brackets with 4 x F Screws as shown ointhe image.

НАПОМЕНА: Ако држачи телевизора не причврсте за држач помоћу АА сигурносних носача, може доћи до случајног подизања телевизора са продужетака, што може довести до оштећења тела или имовине.

Подешавање нивелисања -5° – +5°
The mount allows up to 5 degrees of leveling adjustment post installation. To adjust the level of the TV, place a bubble level on top of the TV, loosen the 2 x G bolts located behind the VESA plate, level the TV, and tighten the 2 x G bolts to lock the TV in position.

Подешавање нагиба -5° – +10°

The mount can tilt down up to 10 degrees and up 5 degrees. To adjust the tilt angle of the TV, pull out the tilt adjustment levers on both sides of the mount and turn counterclockwise to loosen the screws. Adjust the tilt to the desired angle and turn the tilt adjustment lever clockwise to tighten the screws.

НАПОМЕНА: IF THE TV TILTS DOWN AFTER A PERIOD OF USE, CHECK THE TILT ADJUSTMENT LEVER TIGHTNESS AND TIGHTEN IF NECESSARY.

Користите интегрисане копче за управљање кабловима на рукама да бисте усмерили каблове на полеђину или бочну страну телевизора.

Димензија

ГАРАНТНИ ЛИСТ

МУЛТИБРАЦКЕТС “™ Ограничено Гаранција

Мулти брацкетс налоге своје производи да be бесплатно of дефекти in материјала и израде за тхе производа Гаранција Период.

Тхе Гаранција период почиње on тхе оригинални куповина датум of тхе производ

Све Мулти брацкетс производи су покривена by a ограничени производ гаранција

• ФИВЕ (5) године за метал видео монитор mounts, све регалии non-electrical рацк прибор
• ДВА (2) године за gaslifts и sit-stand радне станице
• ЈЕДАН (1) године за све моторизовани и/или аутоматизовано производи, пластичне говорник mounts, све говорник stands, све намештај, сведрво (МДФ) прибор

За гаранција тврди направио током тхе Гаранција период, МУЛТИНОСАЧЕ воља заменити било који неисправан производ део бесплатно of charge. Should a део on твој Мулти брацкетс производ fail, молим те створити anРМА случај on ввв.multibrackets.com/support да направити a гаранцијатврдити. We воља await твој документацију и затим discuss тхепроблем са ти, и једном we confirm тхе производ is под ратranty, we воља брод замена делови да ти. Ово Ограничено Гаранцијаради не поклопац тхе трошкови of уклањањем и замењујући неисправан деловииз твој Мулти брацкетс производ. дакле, if твој проблем захтева aпоправити technician, ти мора платити било који рада оптужбе.

For warranty claims made during the Warranty Period, MULTI BRACKETS will replace any defective product part free of charge. Should a part of your Multibrackets product fail, please create an RMA case on ввв.мултибрацкетс.цом/суппорт to make a warranty claim. We will await your documentation and then discuss the problem with you, and once we confirm the product is under warranty, we will ship replacement parts to you. This

Limited Warranty does not cover the costs of removing and replacing defective parts from your Multibrackets product. So, if your problem requires arepair technician, you must pay any labor charg.es This Limited Warranty extends only to the original purchaser of the product and is automatically void if your Multibrackets product is modified in any way, improperly installed, taxed beyond its stated weight capacity, or otherwise misused or abused.

All Multibrackets products are intended for indoor use only, and any outdoor use voids this Limited Warranty. The Limited Warranty for wall and ceiling mounts is void if the mount is moved from its initial installation. To the maximum extent permitted by applicable law, Multibrackets disclaims any other warranties, express or implied, including warranties of fitness for a particular purpose and warranties of merchantability. Multibrackets will not be liable for any damages whatsoever arising out of the use or inability to use itsproducts, even if Multibrackets has been advised of the possibility of such damages. To the maximum extent permitted by applicablelaw, Multibrackets disclaims any responsibility for incidental or consequential damages,

Multibrackets M Stockholm, Sweden 2016. ввв.мултибрацкетс.цом

The content of this manual is subject to Change wltheut further notice. The latest vers, on of this manual can be found online under the product name on the webсајт: ввв.мултибрацкетс.цом

 

Документи / Ресурси

MULTIBRACKETS 5605 Wall Bracket [пдф] Упутство за инсталацију 5605 Wall Bracket, 5605, Wall Bracket, Wall Bracket, Wall, Bracket

Референце

• Упутство за употребу