PIZZELLO Rectangular Dining Table Instruction Manual

PIZZELLO Rectangular Dining Table

Спецификације

• Designed for durability, weather resistance, and low maintenance
• Погодно for both indoor and outdoor spaces
• Температурни опсег: -104 to -140 (-40 to 60)
• Време састављања: До 30 минута

Упутства за употребу производа

Листа делова:

List of parts A-N with quantities and sizes.

Потребни алати:

• Имбус кључ (обезбеђен)
• Open-end wrench (Provided)

Упутство за монтажу

• 1. корак: Connect panel E and panel D using screw G and nut N. Ensure correct connection by checking for 4 silver screw heads in the middle of the table.
• 2. корак: Assemble parts C, Cupright, F, and L screws as instructed.
• 3. корак: Continue assembling part F with part B using L screws.
• 4. корак: Attach the connected B and C parts to the tabletop using screw J.
• 5. корак: Connect part A with parts B and C using screws J and H. Secure with screw H from the inside.

Patio Bistro Chair

• Follow the labeled legs for the front side indication
• Assemble on a flat surface to avoid scratches
• Do not dispose of the original box until you confirm the product
• Contact after-sales service for product return

УВОД

• Thank you for choosing our rectangular dining table! This table is designed for durability, weather resistance, and low maintenance, making it a great addition to both indoor and outdoor spaces.
• To ensure long-lasting use and maintain its quality, please read and follow the usage precautions below.

Мере опреза при употреби

ПАЖЊА

• Отпорност на топлоту: The table can withstand temperatures between -104℉ to -140℉ (-40℃to -60℃）. Avoid placing high-temperature objects (such as grills or hot pots) directly on the surface to prevent damage. Using heat-resistant mats is recommended.
• Избегавајте продужено излагање сунцу: While our table is weather-resistant, extended exposure to strong sunlight may cause fading or slight warping. Covering the table with a cloth or protective cover when not in use is advised.
• Спречити огреботине: Avoid using sharp objects such as knives directly on the table surface to prevent scratches.

ПОТРЕБНИ АЛАТИ

ЗАХТЕВИ ЗА МОНТАЖУ

ДЕЛОВИ ЛИСТА

УПУТСТВО ЗА МОНТАЖУ

1. Корак 1
   • Use screw G and nut N to connect panel E and panel D.
   • Напомена: If part E is correctly connected, you will see the 4 silver screw heads in the middle of the table.
   • Please check it before installing.
   • A) If part E is correctly connected, you will see the 4 silver screw heads in the middle of the table.
   • B) If part E is incorrectly connected, you will see the 4 silver screw heads on the side of the table, and you will have a problem on the next step.
2. Корак 2
   1. Stand parts C and Cupright at a 90-degree angle to the ground or easier installation.
   2. Insert one end of part F into part C, align the holes, and secure it with two L screws.
3. Корак 3
   • Insert the other end of part F into part B, align the holes, and secure it with two L screws
4. Корак 4
   • Attach the connected B and C parts to the tabletop using screw J.
5. Корак 5
   • Use screws J and H to connect part 2 (A) parts with parts B and C.
   • (Secure with screw H from the inside)
   • Secure with screw H from the inside

PATIO BISTRO CHAIR

Поштовани купче,

• Thank you for choosing our product. Please read this manual carefully before assembling or using the product, to avoid damage caused by improper use.
• If the product is passed on to third parties, this manual has to be passed on along with the product. For any questions, don’t hesitate to contact us.

ПОТРЕБНИ АЛАТИ

ЗАХТЕВИ ЗА МОНТАЖУ

СПИСАК ДЕЛОВА

• Fasten screws loosely during initial assembly. Do not firmly tighten screws until step 7.

Упутство за монтажу

• Савети: We have labeled the legs to indicate which side is the front side.
• However, the factory sometimes mislabeled them. Please check with the picture before installing; the straighter side should be the front side.

ПАЖЊА

• When installing, we suggest you can assemble the product on the flat carton which comes with the product, or any other clean floor to avoid the product surface being scratched.
• Please do not dispose of the original product box until you confirm you received the complete and correct item.
• If you want to return the product, you are suggested to contact our after-sales service first. You need to pack the returned product with the original box and then follow the steps to return it.
• Корак 1: Connect the beam (E) and the left front leg (A). Use the screw (G) and nut (F) to connect them.
• Please don’t tighten the screws yet.
• Корак 2: Connect the beam (E) andthe  Right Front Leg (B). Use the screw (G) and nut (F) to connect them.
• Please don’t tighten the screws yet.
• Корак 3: Attach the chair seat (C) to the Left Front Leg (A) and the Right Front Leg (B).
• Please make sure you attach the seat from the correct direction.
• 4. корак: Use the 4 scresw (G) and 4 nuts (F) to connect them.
• Корак 5: Remove the 2 protective cases on the seat (C).
• Корак 6: Assert the seat back (D) to the seat (C).
• Корак 7: Затегните све завртње и матице.

How To Replace The Back And Seat

• A: Slowly take apart the back of the back frame.
• B) Slowly take apart the seat from the seat frame.
• Напомена: When replacing the new seat and back, make sure you assemble them from the correct direction. The edge with round angle should face outside.

ФАК