Ротх-лого

Roth QuickTemp компактни систем

Roth-QuickTemp-Compact-System-Product

Спецификације производа

  • Димензије: 61 цм к 61 цм к 40 цм
  • Максимално оптерећење: 2 мм по метру
  • Потребна монтажа

Roth-QuickTemp-Compact-System-Fig- (1)

Planlæg hvordan Compact pladerne skal udlægges. OBS. Roth-QuickTemp-Compact-System-Fig- (2)

Roth-QuickTemp-Compact-System-Fig- (3)  Always read the full documentation

Roth-QuickTemp-Compact-System-Fig- (4)Усисајте подлогу. Roth-QuickTemp-Compact-System-Fig- (5)

Split the turn plate and lay it first.

Roth-QuickTemp-Compact-System-Fig- (6)

Жлебови између плоча морају бити поравнати.

Roth-QuickTemp-Compact-System-Fig- (7)

Cut plates from the back, remove any burrs.

Roth-QuickTemp-Compact-System-Fig- (8)

Користите преносне плоче за доводне цеви/за попуњавање празнина.

Roth-QuickTemp-Compact-System-Fig- (9)

Vacuum before installation of pipes.

Roth-QuickTemp-Compact-System-Fig- (10)

Постављајте цеви чврсто/близу унутрашњег круга наизменично.

Roth-QuickTemp-Compact-System-Fig- (11)

Инсталирајте цеви и извршите испитивање притиска.

Roth-QuickTemp-Compact-System-Fig- (12)

Vacuum before installation of flooring underlayment

Roth-QuickTemp-Compact-System-Fig- (13)

Flooring underlayment. Avoid overlapping.Roth-QuickTemp-Compact-System-Fig- (14)Lay wood floor at a 90° angle to pipes.

Кораци инсталације

  1. Place component A on a flat surface with dimensions 61 cm x 61 cm.
  2. Attach component B to component A using the provided screws (X mm).
  3. Ensure that the maximum load of 2mm per meter is not exceeded.
  4. Connect component C to the assembly following the designated markings.
  5. Secure all components in place as per the assembly diagram.
  6. Continue adding components in the specified order until the structure is complete.
  7. Проверите стабилност и извршите подешавања ако је потребно.
  8. Ваш производ је сада спреман за употребу!

ФАКс

Која је максимална носивост производа?

The maximum load capacity is 2mm per meter.

Да ли су ми потребни додатни алати за монтажу?

The assembly requires screws (X mm) provided with the product. No additional tools are necessary.

Да ли се производ може раставити за складиштење?

Yes, the product can be disassembled following the reverse order of the installation steps.

Документи / Ресурси

Roth QuickTemp компактни систем [пдф] Упутство за инсталацију
Компактни систем QuickTemp, QuickTemp, Компактни систем, Систем

Референце

Оставите коментар

Ваша емаил адреса неће бити објављена. Обавезна поља су означена *