SMARTOP TECH FP31 Mini Printer User Guide

SMARTOP TECH FP31 Mini Printer

Спецификације

• Назив производа: Мини штампач
• Повезивање: Bluetooth (via Faith Tag апликација)
• Порт за пуњење: Типе-Ц
• Улазна снага: DC 5V (via Type-C port)
• Тип папира: Self-adhesive paper roll
• безбедност: FCC Compliant, IC RF Exposure Compliant

Упутства за употребу производа

• Геттинг Стартед
  • Преузмите апликацију: Тражи the ‘Faith Tag’ app on the App Store or Google Play.
• Напуните штампач:
  • Prepare your own DC 5V power adapter with a Type-C port.
  • Insert the Type-C end of the USB cable into the printer’s Type-C charger port.
  • Plug the other end of the Type-C cable into the Type-C port of your power adapter.
  • The indicator light will flash slowly with a white light while charging.
  • Charge for at least 30 minutes for quick use, or 2 hours for a full charge.
  • When fully charged, the indicator light will stay white (if turned on) or go out (if turned off).
  • Unplug the charger promptly once fully charged. Avoid using the printer while charging, as it may reduce charging speed, compromise print quality, and shorten battery life.
• Loading/Replacing the Paper Roll
  • Before starting printing, please ensure that the paper roll is properly loaded into the paper compartment.
  • Push the Cover Open Button towards the arrow to open the Paper Compartment.
  • Pull out the Movable Damper to remove the paper roll to be replaced.
  • Some paper rolls include tubes. Remove the paper tube after running out.
  • Insert one section of the spindle into the paper roll to be installed.
  • Place the paper roll into the Paper Compartment.
  • Поново инсталирајте покретни Дampи гурните га до ивице ролне папира.
  • Pull the paper roll out until it extends beyond the Paper Output Slot.
  • Затворите горњи поклопац.
• Укључивање штампача
  • Long press the Power Button for three seconds until the Indicator Light is on.
• Повезивање преко Блуетоотх-а
  • Open the ‘Faith Tag' апп.
  • The app will request permission to use Bluetooth. Tap ‘OK’ to grant permission.
  • Tap ‘Connect’ on the home page.
  • Once connected, tap the home page to view скрипте.
• Штампање
  • After connecting, tap ‘Print’.
  • Tap ‘Print’ again to confirm.
  • Штампање је завршено.
• Tearing Off Labels
  • Откините етикету дуж излаза за папир.
  • Уклоните подлогу.
  • Stick the label onto a dry surface.
• Решавање проблема
  • Штампач се не укључује: Ensure the printer is charged. Refer to ‘Charging Instructions’.
  • Printing issues: Check if the paper roll is properly loaded. Refer to ‘Replacing the Paper Roll’.
  • Проблеми са Bluetooth везом: Ensure Bluetooth is enabled on your device and the ‘Faith Tag’ app has permission to use it. Try restarting the printer and the app.
  • Лош квалитет штампе: Ensure the paper roll is inserted correctly and is not old or damaged. The print head may be hot; allow it to cool down before further use.
  • Interference (FCC/IC): This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at their own expense.

Loading PDF…

−+Fit width100%View FullscreenDownload PDFPrint PDF

×

Loading PDF…

Увод у производ

1.1 Листа паковања

O The quantity and specifications of the paper roll(s) are tailored to the package you’ve chosen.
1.2 Упутство за делове штампача

Геттинг Стартед

2.1 Преузимање апликације
Тражи the “FaithTag” app on App Storeo or Google PlayTM for download and installation.

2.2 Упутство за кориснике
O Before starting printing, please ensure that the paper roll is properly loaded into the paper compartment. For detailed instructions, refer to the manual section “3. Replacing the Paper Roll.”

Да бисте укључили штампач, дуго притисните дугме за напајање три секунде док се индикаторска лампица не упали.

Connection complete. Tap the homepage to view scriptures.

Замена ролне папира

Take out a brand new paper rollZ01
Please skip this step if the paper roll you ave is not newly purchased and boxed.
Push the Cover Open Button towards the arrow to take out the Paper Roll Spindle.

Упутства за пуњење

1. Please prepare your own power adapter (DC 5V/2A) with a Type-A port.
2. Insert the Type-C end (flat end) of the USB cable into F21’s Type-C Charger Port and plug the Type-A end (wide end) into the Type-A port of the power adapter.
3. After connecting and plugging in, please check the status of the printer indicator light. When the printer is charging, the indicator light will be flashing slowly with a “white light”.
4. Please charge for at least 20 minutes to meet quick usage; charging for 2-3 hours will complete the charging, or the following two states indicate full charge: when turned on, the indicator light stays “white”; when turned off, the light goes out.
5. As the printer may heat up during charging, avoid placing it on materials such as cotton or linen.
6. Once the battery is fully charged, please unplug the charger promptly.
O Avoid using the printer while charging.Using the printer while charging may lead to reduced charging speed, compromised print quality, and shortened battery life.

Посебне напомене

Компанија преузима пуну одговорност за ревизију и објашњење овог приручника, полажући највећу пажњу да гарантује његову тачност. Ипак, имајте на уму да било каква техничка побољшања производа можда неће бити посебно обавештена и да слике производа, додатне опреме, софтверских интерфејса итд. у овом приручнику служе искључиво као илустрације и референце. Због ажурирања и надоградње производа, стварни производ може мало да се разликује од слика. Молимо погледајте физички производ за тачне приказе.