Xero PS5 Wireless Controller

Информације о производу
Спецификације
- Назив производа: Ксеро бежични контролер
- Компатибилност: ПС5
- Повезивање: Бежични, Блуетоотх
- Порт за пуњење: УСБ-Ц
- Додатне карактеристике: Built-in microphone, speaker, touchpad
Упутства за употребу производа
Повезивање вашег контролера
- Make sure the controller is fully charged.
- Укључите своју ПС5 конзолу.
- Connect your controller to the console via the USB-C cable provided.
- Press the button on the controller until the light on the touchpad illuminates.
- Сада можете да искључите УСБ кабл.
- Напомена: After the initial connection, you can simply press the button to connect wirelessly via Bluetooth in the future.
Видљивост Bluetooth-а
- To put the controller in Bluetooth pairing mode, hold down the SHARE button and press the button. This makes the controller visible in the PlayStation menu Settings under Accessories-General-Bluetooth Accessories.
Контролер пуњења
- Use the included USB cable to connect the Xero PS5 Controller to your PS5 console for charging. The lights on the controller will indicate charging status.
Буђење и спавање
- If the controller is disconnected for more than 30 seconds, it enters sleep mode. Press the button to wake it up. If there’s no user input for more than 10 minutes, it will also go into sleep mode. Press the button to reconnect.
Додељени играчи
- The Xero Wireless Controller indicates the player number assigned through the colored bar on the touchpad.
Шта је у кутији
- 1 к Wireless Xero controller
- 1 к УСБ-Ц кабл за пуњење

Повезивање вашег контролера
- НАПОМЕНА – The console supports one primary controller per User, so to use your XERO Controller with an existing User you you must log out any controller already connected as that user.
- If, when adding a controller, you assign it to a new User, then the above steps are not required.
- Повезивање вашег Xero бежичног контролера са PS5 конзолом је веома брзо и једноставно.
- ПРВИ ПУТ када повежете Xero контролер са конзолом, МОРАТЕ то да урадите преко USB-C кабла, након чега ће функционисати бежично без употребе кабла.
- Уверите се да је контролер потпуно напуњен (погледајте одељак Пуњење контролера)
- Укључите своју конзолу.
- Повежите контролер са конзолом помоћу USB-C кабла (испоручено).
- Затим притисните тастер
дугме на контролеру док се не упали лампица на додирној табли. - Сада можете да искључите УСБ кабл.

- Once you have connected the Xero Controller via these steps, you can just press the
дугме у будућности за повезивање са конзолом путем Блутут-а.
Блуетоотх видљивост
- Можете да ставите контролер у режим упаривања путем Bluetooth-а тако што ћете држати притиснуто дугме „SHARE“ и притиснути
дугме. - This enables you to make the controller visible when in the PlayStation menu “Settings” – “Accessories”-” General”- ”Bluetooth Accessories.
- Бежични контролер Xero ће се појавити у вашим Bluetooth додацима као „Бежични контролер DualSense“

Контролер пуњења
- Use the included USB Cable to connect your Xero PS5 Controller to your PS5 console. You can do this with the console turned on or in standby mode.
- When you connect the controller to the console via the USB cable, the Lights will briefly flash ORANGE then go off while charging resumes.

- Да бисте пунили контролер док је конзола у режиму мировања, мораћете да омогућите ову опцију на конзоли.
- The controller can also be charged from other USB power sources such as PC’s and plug-in chargers. Always use a USB cable that complies with the USB standard.
- The light on the controller may not always be visible when charging from other sources.
Контролор
- A: Дугмад за смер
- B: Схаре
- C: Тоуцхпад
- D: Лигхт Бар
- E: Опције
- F: Дугмад за радњу
- H: Десни палица/дугме R3
- I: Дугме за почетни екран/дугме за PS
- J: Уграђен микрофон
- K: 3.5 мм прикључак за слушалице
- L: Дугме за искључивање звука
- M: Спеакер
- G: Леви палица/дугме L3
- N: Дугме Р1
- O: Л1 дугме
- P: Дугме Р2
- Q: Л2 дугме
- R: УСБ-Ц прикључак
- S: ФУНКЦИЈА Р (ФР)
- T: ФУНКЦИЈА Л (ФЛ)
- U: Дугме за ресетовање

Буђење и спавање
- If the controller is disconnected from the console for more than 30 seconds, it will enter sleep mode. Pressing the
button, it will wake up and automatically connect to the PS5. - Када је контролер повезан са PS5, али не прими никакав унос од корисника на било ком од дугмади, тачпеда или џојстика дуже од 10 минута, контролер ће аутоматски прећи у режим спавања.
- To wake the controller up from sleep mode, simply press the
button, and the Xero Controller will reconnect to the PS5.
Додељени играчи
Бежични контролер Xero ће аутоматски назначити који је број играча додељен контролеру путем обојене траке на предњој ивици тачпеда.
Коришћење слушалица
- Укључите слушалице у 3.5 мм прикључак на контролеру
- Идите на Подешавања
- Изаберите Звук
- Изаберите Аудио излаз
- Изаберите излазни уређај
- Изаберите слушалице повезане са контролером
- Подесите Излаз на Слушалице на Сав аудио
- Подесите ниво јачине звука

Ресетовање контролера
- Ако Xero бежични контролер престане да реагује или не може да се повеже са конзолом у било ком тренутку, или ако лампица на предњој страни тачпеда неочекивано трепери, потребно је да ресетујете контролер.
- Please use a Paper Clip or similar to press and hold the RESET(U) button for 2 seconds on the underside of the controller; this will put the controller into its original factory state.
- You will need to reconnect the controller to the console.
Modifying Your Controller
- The Simple and easy way to modify your Controller is by using the accompanying Xero Configurator App.
- In the App, you can Manage Profiles, Button Remap, Adjust Joystick Sensitivity/Dead Zones, Adjust Trigger Sensitivity, Recoil Compensation, Vibration, Sound and more.
ДОСТУПНО ОДМАХ
on your app store
Режими контролера
- НАПОМЕНА: Ваш Xero бежични контролер мора бити упарен и повезан са PS5 конзолом да би могао да обавља било који од следећих задатака.
- Also, make sure the controller has not gone into sleep mode.
- КСЕРО КОНТРОЛЕР ИМА ДВА РЕЖИМА РАДА
Стандардни режим контролера
- In this mode, the controller will operate similarly to a regular PS5 controller.
- The cluster of lights will change depending on the game you are playing or which menu you are in on the interface.
Xero режим ремапирања
- In this mode, the controller will always be flashing many YELLOW lights. You are required to be in this mode to PLAY, MODIFY or DELETE a remapping Profile.
- ДА БИСТЕ ПРЕШЛИ ИЗ ЈЕДНОГ РЕЖИМА У ДРУГИ, ДРЖИТЕ (ДЕЛИ + ОПЦИЈЕ) ЗАЈЕДНО.
- Следећи кораци ће вас водити кроз поступак ремапирања.
- Бившиampилустровани део је ремапирање
button to one of the rear paddles, in this case, the FUNCTION R. The buttons being pressed in this process are indicated in RED below.
- Ако контролер већ није у режиму ремапирања (трепери ЖУТО). Активирајте га тако што ћете истовремено притиснути и држати дугмад SHARE + OPTIONS док светла не трепере ЖУТО.
- Proceed to 3 unless you want to change the SLOT being modified.

- Proceed to 3 unless you want to change the SLOT being modified.
- Quickly press the SHARE button to scroll through to desired slot 1, 2, 3, 4 or 5 (here, SLOT2 is selected).

- Press & hold the SHARE button while also holding the FUNCTION R paddle you wish to assign to, the lights will start to flash quickly in BLUE, now release the buttons.

- Изаберите (
) дугме које желите да поново мапирате на изабрану ручицу FUNCTION R.
- ПЛАВА светла ће накратко непрекидно светлети да би означила да је ремапирање успело, а затим ће се вратити на трепћуће ЖУТО.

- ПЛАВА светла ће накратко непрекидно светлети да би означила да је ремапирање успело, а затим ће се вратити на трепћуће ЖУТО.
- Now, each time the FUNCTION R paddle is pressed it will produce (in our exampле) а
команда.
- Стандард
Дугме на контролеру ће такође функционисати као и обично.
- Стандард
- If you wish to assign a second button to the other function paddle, simply repeat steps 3 & 4, selecting the desired paddle & button to change.
- Сада можете или поново мапирати више дугмади или оставити тренутно ЖУТО трепћуће стање да бисте наставили са играњем са активним пресликавањем.
- Ако контролер већ није у режиму ремапирања (трепери ЖУТО). Активирајте га тако што ћете истовремено притиснути и држати дугмад SHARE + OPTIONS док светла не трепере ЖУТО.
Управљање профилима
- Your Xero Wireless controller comes with 5 built-in Remap Profiles which you can customise to suit your gaming needs.
- Each profile is depicted by the number of lights illuminated on the controller.
- To switch between profiles, quickly press the SHARE button when in “Remap” mode, and the lights will cycle through the 5 profiles continuously.
- Зауставите се на оном који желите да измените, обришете или задржите активним.

- Each profile can be configured individually with remapped buttons to suit a specific game. Within each profile, you can remap as many buttons as you wish.
- All of the remapped buttons are saved to the controller, so when you exit remap mode or turn off your controller, they will still be there when you turn it back on again.
- When you turn back on the controller or return to remap mode, the profile you were last in will be loaded and will be indicated by the corresponding number of lights.
Опције ремапирања
Функција ремапирања бежичног контролера Xero вам омогућава да:
- Switch the buttons with each other.
- Have several of the same buttons.
- Имајте више дугмади мапираних на једно.
- Додајте дугмад на задње функционалне полуге.
EXAMPЛЕ:
- Ако си желео/желела да се промениш
то тхе
. - Уверите се да сте у режиму ремапирања (трепери ЖУТА светла), промените профил (ако желите) кратким притиском на дугме ДЕЛИ.
- Затим држите SHARE +
док светла не затрепери ПЛАВО, сада отпустите. Притисните
, now the light will turn solid BLUE to signify it has been remapped, then will return to the flashing YELLOW of the active slot. - Сада притиском на
дугме ће имати ефекат притиска на
. - Дугме
на контролеру ће и даље функционисати као
такође, зато узмите у обзир ово приликом додељивања дугмади. - It is also easy to map multiple buttons to just one on the controller.
- Фор екample, you could have L1+L2 mapped to the single Function R paddle on the rear of the controller
- To do this, simply press L1+L2 at the same time when assigning your buttons to Function R.
Следећа дигитална дугмад се могу користити за ремапирање:![]()
- To reset an individual button within a profile, hold SHARE and the specific button until the lights flash BLUE, then simply press the SHARE button again; that button will now be the default PS5 button again.
- To erase the mapping for a whole profile, toggle to the desired one by tapping the SHARE button, then hold the SHARE button for about 3 seconds until all lights turn RED. That Profile is now erased and returned to the default PS5 button setup.
- Remember, the controller will only work with your modified buttons if the controller is still in “remap mode” with the YELLOW profile lights illuminated on the controller.
Одржавање и безбедност
- Do not use in places with high humidity, high temperatures, dust, strong magnets or corrosive gases.
- Не растављајте или модификујте контролер.
- Do not insert foreign objects into any part of the controller and its ports.
- Не користите раствараче или хемикалије за чишћење контролера.
- За чишћење контролера користите само суву, меку крпу.
- Држите даље од воде.
- Не постављајте контролер на нестабилне површине.
- Не стављајте предмете на контролер.
- Do not place the controller in places which could harm others.
- Не бацајте или испуштајте контролер, нити га излажите јаким силама.
- Приликом уклањања УСБ кабла, учините то пажљиво како бисте избегли оштећење конзоле или контролера.
Превентивне мере
- Чувати ван домашаја мале деце.
- Избегавајте дуже периоде употребе.
- Ограничите јачину звука ако користите слушалице како бисте заштитили слух.
- Be aware of your surroundings when playing.
- Престаните да играте ако се осећате уморно или болесно.
- Do not handle an exposed or damaged lithium-ion battery.
Складиштење
- Do not store or transport where high temperatures and humidity are present.
- Не излагати прашини, диму или пари.
- Чувати даље од директне сунчеве светлости.
- ОВАЈ ПРОИЗВОД НИЈЕ СПОНЗОРИСАН, ПОДРЖАН ИЛИ ОДОБРЕН ОД СТРАНЕ КОМПАНИЈЕ SONY INTERACTIVE ENTERTAINMENT INC.
Техничка подршка
- Пре него што контактирате Дател-ову службу за кориснике, уверите се да сте прочитали и разумели информације у овом приручнику/водичу.
- Ако контактирате подршку, уверите се да имате при руци информације о томе када и где сте купили овај производ.
- Дател корисничке услуге
- Служба за кориснике,
- Дател Елецтроницс Лтд,
- Стафорд Роад,
- камен,
- Стафордшир,
- СТ15 0ДГ.
- УЈЕДИЊЕНО КРАЉЕВСТВО
- Web: https://support.codejunkies.com
- © 2025 Datel Ltd. Xero is a trademark of Datel Ltd. PlayStation is a trademark or registered Trademark of the SONY COMPANY. All other trademarks are the property of their respective owners.
- Xero Wireless Controller is a 100% unofficial product and is NOT sponsored, endorsed or approved by SONY, nor any game developer or publisher.
ФАК
How do I charge the controller when the PS5 is in rest mode?
You need to enable charging while in rest mode in the console settings. The controller can also be charged using other USB power sources.
Can multiple controllers be connected to one user profile?
The PS5 supports one primary controller per user profile. To use an additional controller with an existing user, you may need to log out any connected controllers.
Документи / Ресурси
![]() |
Xero PS5 Wireless Controller [пдф] Упутство за кориснике ПС5 бежични контролер, ПС5, бежични контролер, контролер |

